https://community.extremenetworks.com/t5/extremewireless-general/implementing-netlogin-with-microsoft-nps-ad-dhcp-server-in/m-p/33378#M1114 I need to implement Netlogin for one of our customers, where all the devices should authenticate and get IP address from an NPS-AD-DHCP server.<BR /> <BR /> It works fine for their PC and but the problem is with their Alcatel IP Phones.<BR /> <BR /> In the current scenario, their alcatel ip phones need to have a "USE VLAN=<VOICEVLAN>" field manually configured on the phone for it get IP address from the PBX.<BR /> <BR /> But it that field is set, the phone will not try to authenticate with the switch.<BR /> If I remove that field, the phone will authenticate with the switch, but it will not get an ip address.<BR /> <BR /> Is any one aware of a similar scenario with Netlogin. <BR /> They have only one voice vlan. So is there a way I can set the ports to have a static tagged vlan while using netlogin to authenticate and dynamically assign the Untagged vlan.<BR /> <BR /> Please ask if you need any details. I would highly appreciate any help. <BR /> <BR /> Thanks,<BR /> Neji<BR /> <BR /></VOICEVLAN> Wed, 11 Nov 2015 20:55:00 GMT Najeem_Moideen 2015-11-11T20:55:00Z https://community.extremenetworks.com/t5/extremewireless-general/implementing-netlogin-with-microsoft-nps-ad-dhcp-server-in/m-p/33378#M1114 I need to implement Netlogin for one of our customers, where all the devices should authenticate and get IP address from an NPS-AD-DHCP server.<BR /> <BR /> It works fine for their PC and but the problem is with their Alcatel IP Phones.<BR /> <BR /> In the current scenario, their alcatel ip phones need to have a "USE VLAN=<VOICEVLAN>" field manually configured on the phone for it get IP address from the PBX.<BR /> <BR /> But it that field is set, the phone will not try to authenticate with the switch.<BR /> If I remove that field, the phone will authenticate with the switch, but it will not get an ip address.<BR /> <BR /> Is any one aware of a similar scenario with Netlogin. <BR /> They have only one voice vlan. So is there a way I can set the ports to have a static tagged vlan while using netlogin to authenticate and dynamically assign the Untagged vlan.<BR /> <BR /> Please ask if you need any details. I would highly appreciate any help. <BR /> <BR /> Thanks,<BR /> Neji<BR /> <BR /></VOICEVLAN> Wed, 11 Nov 2015 20:55:00 GMT https://community.extremenetworks.com/t5/extremewireless-general/implementing-netlogin-with-microsoft-nps-ad-dhcp-server-in/m-p/33378#M1114 Najeem_Moideen 2015-11-11T20:55:00Z