topic RE: RIght NAC interfaces configuration for DHCP Snooping in ExtremeWireless (General)

RIght NAC interfaces configuration for DHCP Snooping

Ilya_Semenov — Wed, 25 Oct 2017 00:15:00 GMT

Hello, everybody,

I had a succesfull experience on bringing PC's OS data to Netsight. (It could be seen in Control >> End systems).

NAC snoops DHCP data in VLAN and (after time-consuming sophisticated configuration) sends it to Netsight. (Where identity-management is also configured).

But it was made for Default VLAN 1 and DHCP server was in the same VLAN.

I want now to configure the same thing but in company where dozens vlan exists and all of them gets IPs by bootp-relay feature from Windows Server.

My question is: what is proper configuration for a NAC interface? Bring all trunks to it?

Please, advice me something correct.

Many thanks in advance, Ilya

RE: RIght NAC interfaces configuration for DHCP Snooping

Ryan_Yacobucci — Wed, 25 Oct 2017 00:25:00 GMT

Hello,

You should be able to configure the network routers with an additional DHCP helper that is pointed to NAC.

DHCP helper 1 points to real DHCP server
DHCP helper 2 points to NAC

The Router should send the DHCP discover/request packets to both the real windows DHCP server and the NAC appliance to perform DHCP snooping.

Thanks
-Ryan

RE: RIght NAC interfaces configuration for DHCP Snooping

Ilya_Semenov — Wed, 25 Oct 2017 00:25:00 GMT

Thanks, I will try to do that.

RE: RIght NAC interfaces configuration for DHCP Snooping

Ilya_Semenov — Wed, 25 Oct 2017 00:25:00 GMT

Hi, Ryan, I did as you'd said and it works perfectly well. Many thanks to you!