topic Identity Dashboard Engine (IDE) Authentication in ExtremeWireless (General)

Identity Dashboard Engine (IDE) Authentication

Mohamad_Farezza — Wed, 14 Nov 2018 06:25:00 GMT

Hi Team, i have one question, In IDE if i want to use Radius access policy for MAC auth then i need to store the MAC in username format in the user set. My question, it is have the other method ? for example using wildcard just add MAC 6 digit only for IP Phone Avaya, it is possible? i have 1000 unit ip phone, can u suggest me the other method to implementation .

RE: Identity Dashboard Engine (IDE) Authentication

Shmulik — Wed, 14 Nov 2018 07:13:00 GMT

Greetings Mohamad,

You can do MAC auh in two ways in IDE: as user auth or as MAC Auth. If you use the MAC Auth Policy method which is the more commonly used, then you can use wildcards for the MAC address in the local store. Take a look at the user guide.

Just reminder to all readers - we encourage migration from IDE to ExtremeControl.

Thanks!

Shmulik

RE: Identity Dashboard Engine (IDE) Authentication

Mohamad_Farezza — Wed, 14 Nov 2018 07:13:00 GMT

Hi Shmulik, do you mean IDE can be combine radius auth and mac auth ? please share link for this method for my reference. thanks

RE: Identity Dashboard Engine (IDE) Authentication

Mohamad_Farezza — Wed, 14 Nov 2018 07:13:00 GMT

Fyi, i want to use Radius auth and MAC auth(using wildcard). it is possible ?

RE: Identity Dashboard Engine (IDE) Authentication

Shmulik — Wed, 14 Nov 2018 11:20:00 GMT

Mohamad,

Take a look at the Ignition Server Configuration Guide for release 9.5.0 page 157 and 158 it shows how it is done. You have to use MAC Auth - see red square on the screenshot.

Shmulik

RE: Identity Dashboard Engine (IDE) Authentication

Mohamad_Farezza — Wed, 14 Nov 2018 12:18:00 GMT

Shmulik

ok, in access policy, can we use both (radius and mac auth) or either one only?

RE: Identity Dashboard Engine (IDE) Authentication

Mohamad_Farezza — Wed, 14 Nov 2018 12:41:00 GMT

attached below diagram setup .