topic RE: Draeger medical device in ExtremeWireless (General)

Draeger medical device

Azienda_Sant_An — Tue, 04 Nov 2014 18:35:00 GMT

Hi
we work in an Italian hospital. We need to connect some medical device, Draeger Infinity M300 telemetry transmitters, to our wireless Infrastructure.
What is the correct configuration that I need to consider ?
We have a V2110 Wireless Controller and many 3705i AP model.
Do you have any guide?

Thanks
Fabrizio Stoppani

RE: Draeger medical device

Nico_Willamowsk — Tue, 04 Nov 2014 18:58:00 GMT

At first, you had to enable "Multicast Support" on ESA0. It´s only possible to enable it on ESA0. Mulicast Assembly at the AP must be enabled (AP Proberties->Advanced->IP Multcast Assembly). You must have the actual firmware, problem with MTU Size is fixed in v8.32.05.007. But in Version 9 the problem still exists, but now it´s fixed in version 9.12.02.0006. You have the fix the channel at the M300 and also at the AP!

RE: Draeger medical device

Azienda_Sant_An — Tue, 04 Nov 2014 19:15:00 GMT

Really if I read the Infinity M330 datasheet , it speak about a Non-Multicast VLAN. I think that multicast works for another kind of device, for example medical monitors.

RE: Draeger medical device

Nico_Willamowsk — Tue, 04 Nov 2014 19:49:00 GMT

At first you write M300 and now M330! What do you mean? The M300 is a medical monitor.

RE: Draeger medical device

Azienda_Sant_An — Tue, 04 Nov 2014 20:25:00 GMT

Sorry, a mistake. It's right Infinity M300.
http://www.draeger.com/sites/enus_us/Pages/Hospital/Infinity-M300.aspx

RE: Draeger medical device

Muedsam__Jochen — Wed, 05 Nov 2014 01:08:00 GMT

Hi, I have a confirmed Implementation Guide for Draeger. Pls send me your mail address and I can forward it.

Jochen

RE: Draeger medical device

Neal_Clonts — Wed, 05 Nov 2014 01:08:00 GMT

Do you still have this guide?

RE: Draeger medical device

Neal_Clonts — Wed, 05 Nov 2014 01:08:00 GMT

my email is nclonts@gmail.com

RE: Draeger medical device

Drew_C — Wed, 05 Nov 2014 01:08:00 GMT

Hi Neal,
I've tried to find this document internally but didn't have any luck. It's been quite a while since Jochen posted and it seems he's no longer with the company. I'll try some other avenues to see if it turns up.

RE: Draeger medical device

Azienda_Sant_An — Wed, 05 Nov 2014 04:13:00 GMT

Hi Jochen
Thanks a lot
fstoppani@csy.it

RE: Draeger medical device

CarlyBatts — Fri, 20 Mar 2015 19:14:00 GMT

Traditionally medical devices have been hard-wired which not only consume lots of space, but have limited approach too. Wireless technology is changing the medical device industry rapidly and turning out to be the most preferred method for healthcare delivery system. It helps doctors and nurses to give patient’s better care and work more efficiently in safe environment. Draeger Infinity® M300 is one of the best examples of wireless technology medical device, which is useful for continuous standalone monitoring of patient, even when they are moving out of the wireless network coverage area of hospital. As you want to know about the connecting process for this device in hospital, I think this http://www.reuters.com/article/2008/08/12/idUS155357+12-Aug-2008+BW20080812 would be of help for you.

Re: Draeger medical device

KHP — Tue, 16 Apr 2024 12:55:14 GMT

Hello, we also have Dräger in our hospital. According to Dräger, only APs that have been certified by Dräger in an Infinity Network Health Check can be operated. In our case the AP305C-WR with software version 10.4.3.0. We are currently trying to certify the current version 10.6.6.0, but this is not that easy with Dräger and is expensive. ;-(( There is also an Infinity One Net document that contains all of Dräger's LAN and WLAN requirements. However, I only have this in German.
FYI

Re: RE: Draeger medical device

ExtremeNorth — Tue, 10 Dec 2024 17:17:41 GMT

Are you able to send this guide to me also?

Terrel.