topic RE: Netlogin and spanning tree in ExtremeWireless (General)

Netlogin and spanning tree

Gabriel_Bagita — Thu, 27 Jul 2017 12:09:00 GMT

I'd like to assign a port to a vlan based on a device type. On a switch I've configured netlogin with mac authentication. It's working fine until the NAC doesn't want to assign a port to a vlan, which is part of a spanning tree. It is not working at all. Is it a normal behavior?

RE: Netlogin and spanning tree

StephenW — Thu, 27 Jul 2017 17:17:00 GMT

Are you on EXOS 22.2 It added STP support for Netlogin on dynamic vlans.

http://documentation.extremenetworks.com/release_notes/ExtremeXOS/22.2/EXOS_Release_Notes/22.2/c_stp...

RE: Netlogin and spanning tree

Gabriel_Bagita — Thu, 27 Jul 2017 17:17:00 GMT

Hi Stephen,
thank you for the advice, but we are using the X440 switches, and as I know, EXOS 22.2 and newer is just supported on the G2 series devices.We're running EXOS version 16.1.2.14.

RE: Netlogin and spanning tree

Jeremy_Gibbs — Thu, 27 Jul 2017 17:33:00 GMT

Do you get an error? Are you using Extremes NAC (NetSight)? Are you using RFC3580?
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-NAC-to-work-with-RFC3580-...

RE: Netlogin and spanning tree

Gabriel_Bagita — Thu, 27 Jul 2017 17:33:00 GMT

Hi Jeremy,
thanks for the advice. We're using Extreme NAC as you're writing and the X440 Series switches. In the NAC we are using the Extreme NetLogin - VLAN ID RADIUS Attributes profile which is working with VLANS, which are not a part of a SPT domain. But I think, the correct RADIUS Attributes profile should be the Extreme NetLogin - Vlan Name profile. I'm going to try it. I'll see if it help.

RE: Netlogin and spanning tree

Gabriel_Bagita — Thu, 27 Jul 2017 17:33:00 GMT

Hello Jeremy,
you advice helped me. The problem was in the wrong RADIUS Attributes profile. The correct profile is the Extreme Netlogin - Vlan Name profile, as I've written it before. Thanks a lot.