https://community.extremenetworks.com/t5/extremewireless-general/ap410c-ap-up-but-clients-cannot-connect/m-p/95942#M3020 <P>When I've had similar situations, I always check the CLI for errors. In my experience these conditions typically indicate failing hardware and usually gets to the point where the AP will no longer boot properly.</P><P>sh log buff | inc error</P><P>sh log buff | inc warning</P><P>Sometimes that will give hints if there is a hardware issue. Look for radios flapping up and down etc.</P><P>I'm not sure on the debug side how to dig into that.</P> Tue, 23 May 2023 21:10:06 GMT w1f1n00b 2023-05-23T21:10:06Z https://community.extremenetworks.com/t5/extremewireless-general/ap410c-ap-up-but-clients-cannot-connect/m-p/95929#M3018 <P>We are seeing a issue where the AP has a solid white light the AP can be seen as green on the Extreme Cloud IQ and no alerts over CPU, Memory or Clients. We have to reboot this unit to get it letting clients connect again.&nbsp;</P><P>Is there a way we can check what is happening with this AP in terms of Client Auths via debugs?</P> Tue, 23 May 2023 10:46:24 GMT https://community.extremenetworks.com/t5/extremewireless-general/ap410c-ap-up-but-clients-cannot-connect/m-p/95929#M3018 Sandeepb 2023-05-23T10:46:24Z https://community.extremenetworks.com/t5/extremewireless-general/ap410c-ap-up-but-clients-cannot-connect/m-p/95942#M3020 <P>When I've had similar situations, I always check the CLI for errors. In my experience these conditions typically indicate failing hardware and usually gets to the point where the AP will no longer boot properly.</P><P>sh log buff | inc error</P><P>sh log buff | inc warning</P><P>Sometimes that will give hints if there is a hardware issue. Look for radios flapping up and down etc.</P><P>I'm not sure on the debug side how to dig into that.</P> Tue, 23 May 2023 21:10:06 GMT https://community.extremenetworks.com/t5/extremewireless-general/ap410c-ap-up-but-clients-cannot-connect/m-p/95942#M3020 w1f1n00b 2023-05-23T21:10:06Z