topic Re: Can i join an Extreme AP5010 to WiNG OS NX7500 in ExtremeWireless (General)

Can i join an Extreme AP5010 to WiNG OS NX7500

john_miles — Mon, 08 Jan 2024 18:59:44 GMT

Are newer WiFi6E APs e.g. 5010 compatible with the WiNG OS architecture i.e. NX7500?

https://www.extremenetworks.com/products/wi-fi-access-points/universal-aps-indoor/ap5010

https://www.extremenetworks.com/products/wlan-controllers/wing-controllers/wing-nx-7500

If not what are my on-premise controller options for the WiFi6E APs?

Re: Can i join an Extreme AP5010 to WiNG OS NX7500

Christoph_S — Tue, 09 Jan 2024 13:24:37 GMT

Hello John,

The release notes should let you know if they are supported.

In WiNG 7.9.3.0 both the NX7500 and AP5010 are supported so you should not have any problems getting the APs adopted by this controller in this firmware version.

7.9.3.0 release notes: https://documentation.extremenetworks.com/release_notes/Wing/9037764-02_Wing_v7_9_3_0_Release_Notes.pdf

The other on-prem options would be the VX9000 or CX9000 controllers.

I hope this helps,

BR,

Re: Can i join an Extreme AP5010 to WiNG OS NX7500

john_miles — Wed, 10 Jan 2024 00:53:22 GMT

I found the data sheet for VX9000. Is there a datasheet for CX9000 as well?

https://www.extremenetworks.com/products/wlan-controllers/wing-controllers/wing-vx-9000

Re: Can i join an Extreme AP5010 to WiNG OS NX7500

Christoph_S — Wed, 10 Jan 2024 13:13:36 GMT

Some info for your perusal!

https://www.extremenetworks.com/products/universal-compute-platform/universal-appliances/universal-compute-platform

BR,