https://community.extremenetworks.com/t5/extremewireless-general/starting-out-with-an-ap150w/m-p/121109#M3677 <P>I have just purchased two used AP150W devices. I believe I have reset them by holding in the reset button and powering on. When I connect to the console port at 9600 baud I can see the device talking to me:</P><P>Welcome to Extreme Networks Product</P><P>LCP-SO21_2JN -AP150W-01 login:</P><P>The old Aerohive standby of admin/aerohive or admin/Aerohive1 isn't accepted and it just asks me to login again. How do I get to the CLI?</P> Mon, 19 Jan 2026 12:11:34 GMT JoeKing 2026-01-19T12:11:34Z https://community.extremenetworks.com/t5/extremewireless-general/starting-out-with-an-ap150w/m-p/121109#M3677 <P>I have just purchased two used AP150W devices. I believe I have reset them by holding in the reset button and powering on. When I connect to the console port at 9600 baud I can see the device talking to me:</P><P>Welcome to Extreme Networks Product</P><P>LCP-SO21_2JN -AP150W-01 login:</P><P>The old Aerohive standby of admin/aerohive or admin/Aerohive1 isn't accepted and it just asks me to login again. How do I get to the CLI?</P> Mon, 19 Jan 2026 12:11:34 GMT https://community.extremenetworks.com/t5/extremewireless-general/starting-out-with-an-ap150w/m-p/121109#M3677 JoeKing 2026-01-19T12:11:34Z https://community.extremenetworks.com/t5/extremewireless-general/starting-out-with-an-ap150w/m-p/121112#M3678 <P>I'm in!</P><P>It seems that I hadn't reset the device properly. If you leave power and the console connected and then press and hold the reset button then you can see when, after 5 seconds, it loads the defaults and reboots.</P> Mon, 19 Jan 2026 16:58:48 GMT https://community.extremenetworks.com/t5/extremewireless-general/starting-out-with-an-ap150w/m-p/121112#M3678 JoeKing 2026-01-19T16:58:48Z