https://community.extremenetworks.com/t5/extremewireless-general/nac-configuration-example-for-h3c-comware-switches/m-p/32574#M945 Hello,<BR /> <BR /> There isn't any documentation I can provide specifically for HP Comware deployments but I have seen and worked with these devices before with management attributes and general configurations. They are compatible with the Extreme NAC solution using RFC 3580. I found an article that may help with the configuration, it was made with an E4506 which I think is an HP Comware device. <BR /> <BR /> Check out: <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/HP-Configuration-used-for-NAC/" target="_blank" rel="nofollow noreferrer noopener">https://gtacknowledge.extremenetworks.com/articles/How_To/HP-Configuration-used-for-NAC/</A><A href="https://gtacknowledge.extremenetworks.com/articles/How_To/HP-Configuration-used-for-NAC/" target="_blank" rel="nofollow noreferrer noopener"></A><BR /> <BR /> If you run into any issues I would suggest creating a case with GTAC for further investigation. <BR /> <BR /> Thanks<BR /> -Ryan Mon, 05 Oct 2015 03:23:00 GMT Ryan_Yacobucci 2015-10-05T03:23:00Z https://community.extremenetworks.com/t5/extremewireless-general/nac-configuration-example-for-h3c-comware-switches/m-p/32573#M944 Hi community,<BR /> <BR /> does anyone of you has experience with HP (H3C) Comware switches? I have an upcomming PoC with NAC. So I'm interested in how to configure dot1x and MAC authentication. The aim is do MAC Auth and Dot1x on the same port.<BR /> <BR /> Unfortunately Google shows only a few examples and from what I read till now there are different ways to configure it with different results. So maybe if someone of you already implemented NAC into an H3C enviroment we can share experiences. <BR /> <BR /> Best Regards<BR /> Michael Thu, 20 Aug 2015 13:49:00 GMT https://community.extremenetworks.com/t5/extremewireless-general/nac-configuration-example-for-h3c-comware-switches/m-p/32573#M944 Michael_Kirchne 2015-08-20T13:49:00Z https://community.extremenetworks.com/t5/extremewireless-general/nac-configuration-example-for-h3c-comware-switches/m-p/32574#M945 Hello,<BR /> <BR /> There isn't any documentation I can provide specifically for HP Comware deployments but I have seen and worked with these devices before with management attributes and general configurations. They are compatible with the Extreme NAC solution using RFC 3580. I found an article that may help with the configuration, it was made with an E4506 which I think is an HP Comware device. <BR /> <BR /> Check out: <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/HP-Configuration-used-for-NAC/" target="_blank" rel="nofollow noreferrer noopener">https://gtacknowledge.extremenetworks.com/articles/How_To/HP-Configuration-used-for-NAC/</A><A href="https://gtacknowledge.extremenetworks.com/articles/How_To/HP-Configuration-used-for-NAC/" target="_blank" rel="nofollow noreferrer noopener"></A><BR /> <BR /> If you run into any issues I would suggest creating a case with GTAC for further investigation. <BR /> <BR /> Thanks<BR /> -Ryan Mon, 05 Oct 2015 03:23:00 GMT https://community.extremenetworks.com/t5/extremewireless-general/nac-configuration-example-for-h3c-comware-switches/m-p/32574#M945 Ryan_Yacobucci 2015-10-05T03:23:00Z