topic RE: Airmagnet Pattern Files for AP3805i in ExtremeWireless (Identifi)

Airmagnet Pattern Files for AP3805i

Peter_Kulmbrein — Mon, 10 Oct 2016 15:13:00 GMT

Hi,

did anyone already create the radiation pattern for the AP3805i Access-Points in Fluke Airmagnet?

I did and it seems to be not really working as my 5GHz Radio has a lot of more coverage
than the 2.4 GHz Radio

Any ideas on that?

regards
Peter

RE: Airmagnet Pattern Files for AP3805i

Jason1 — Tue, 15 Nov 2016 00:02:00 GMT

Hi Peter,

I do not have a radiation pattern created in Fluke Airmagnet, but this is the data sheet for the WS-AP3805i and has radiation patterns for both radios. (I'm assuming you likely have already seen this but did not see a reply to your post)

http://www.extremenetworks.com/product/ap3805/

If there is a big discrepancy in the signal you're seeing, perhaps it is due to country or channel/config settings. If needed, we could open a case to investigate for you.

Thanks,
Jason

RE: Airmagnet Pattern Files for AP3805i

Peter_Kulmbrein — Tue, 15 Nov 2016 00:15:00 GMT

Hi Jason, Already fixed that myself we had to adjust some parameters in the Airmagnet Settings - nevertheless pattern files would be great as other vendors patterns are delivered with Airmagnet for free and you save much time when you dont have to create them manually Peter