topic RE: I have an WS-AP3805i with flashing green leds in ExtremeWireless (Identifi)

I have an WS-AP3805i with flashing green leds

Jeff_Wilcenski — Tue, 07 Aug 2018 22:31:00 GMT

I have an WS-AP3805i that had been working but now the radio leds and power led are alternating flashing green. So the radio leds flash green and then the power led flashes green.

RE: I have an WS-AP3805i with flashing green leds

Doug — Tue, 07 Aug 2018 23:19:00 GMT

Jeff,

So it's not working in this state? It may not be able to reach the controller for some reason.

Flashing Green Indicates:

Running a self test
Loading software program

RE: I have an WS-AP3805i with flashing green leds

Umut_Aydin — Tue, 07 Aug 2018 23:25:00 GMT

Hi Jeff, if service is providing it could be that your AP is working in br@ap in absence of the controller. Regards Umut Aydin

RE: I have an WS-AP3805i with flashing green leds

Jeff_Wilcenski — Tue, 07 Aug 2018 23:26:00 GMT

No it's not working. In the controller console it's showing up as inactive. I'm now noticing that the power led is flashing orange if that makes a difference?

RE: I have an WS-AP3805i with flashing green leds

Ronald_Dvorak — Tue, 07 Aug 2018 23:50:00 GMT

Check the GUI > Reports > APs > Active APs.
Is the AP listed or not = active tunnel to the controller.

If not - does the AP get an IP, could you ping it, could you ping it from the controller interface that is enabled for AP registration.

RE: I have an WS-AP3805i with flashing green leds

Doug — Wed, 08 Aug 2018 00:00:00 GMT

...then if you can ping it, can you SSH to it?

RE: I have an WS-AP3805i with flashing green leds

Jeff_Wilcenski — Wed, 08 Aug 2018 00:14:00 GMT

I reset the port on the switch and it's working now, thank you for the help, I'll have to watch this one and see if it keeps working