topic RE: How can I turn seamless roaming on V2110? in ExtremeWireless (Identifi)

How can I turn seamless roaming on V2110?

Ilya_Semenov — Mon, 24 Apr 2017 15:04:00 GMT

Hello, everybody!

I have one V2110 controller (v10) and 10 APs. I need seamless roaming (mobility) for clients. How can I turned it on? The APs are 3805i, auth type is WPA-PSK.

Many thanks in advance,

Ilya

RE: How can I turn seamless roaming on V2110?

Umut_Aydin — Mon, 24 Apr 2017 15:16:00 GMT

Ilya,

roaming is seamless so you don't need enable special for this.

Regards

Umut

RE: How can I turn seamless roaming on V2110?

Umut_Aydin — Mon, 24 Apr 2017 15:18:00 GMT

If you have more pair ( but you have only one controller so it's not needed)
then you need enable mobilty .

This can be done in the menu
Controller->Services->Mobility Manager

RE: How can I turn seamless roaming on V2110?

Zdeněk_Pala — Mon, 24 Apr 2017 15:25:00 GMT

For PSK you need to design right coverage. The client should have a AP to what can roam. If there are too many APs it is bad. If there is no AP to roam it is bad.

RE: How can I turn seamless roaming on V2110?

Ilya_Semenov — Mon, 24 Apr 2017 15:32:00 GMT

Thanks, gentlemen!