topic RE: Wireless Controller (v2110) cluster separation ? in ExtremeWireless (Identifi)

Wireless Controller (v2110) cluster separation ?

Boopaa — Fri, 23 Feb 2018 21:26:00 GMT

Team,

We need to remove the Wireless controller V2110 from a cluster.
Could you please suggest me any article or documents to achieve this .!!!

Thanks in Advance.!!!
Boopathy Chnadrasekar

RE: Wireless Controller (v2110) cluster separation ?

Ronald_Dvorak — Fri, 23 Feb 2018 22:09:00 GMT

Do you mean a controller availability pair or mobility group?
What software version is running on the controller?

-Ron

RE: Wireless Controller (v2110) cluster separation ?

Ronald_Dvorak — Fri, 23 Feb 2018 22:09:00 GMT

Why do you want to remove the controller - just to better untstand the issue.

RE: Wireless Controller (v2110) cluster separation ?

Boopaa — Fri, 23 Feb 2018 22:09:00 GMT

we are using 2 Wireless controllers in a Cluster (v2110) & along with 180+ wireless AP 3825i and we are planning to upgrade the controllers into v9.21.19.
(Current version : 9.21.07 )

Our plan of action is like :
- to separate the controllers from the Cluster and going to upgrade only one Controller into 9.21.19.
( Note : Each controller registered with 80 Wireless AP 3825i. )

So, we need to remove the controller from the Cluster.

Thank you ,
Boopathy Chandrsekar

RE: Wireless Controller (v2110) cluster separation ?

Ronald_Dvorak — Fri, 23 Feb 2018 22:09:00 GMT

There is no need to remove the cluster - you'd only upgrade one controller and the APs on it.

But if you'd like you just set availability back to stand-alone in the GUI > controller > administration > availabliity.

That would mean you don't have any redundancy in case of a controller outage.