topic RE: Print from wireless segment to wired segment is not working in ExtremeWireless (Identifi)

Print from wireless segment to wired segment is not working

juan_romero — Thu, 18 Aug 2016 22:56:00 GMT

I have a printer in a wired segment with this ip 10.106.2.240/24 and my wireless segment is 10.106.3.0/24 but I can not print, ipforwarding is enabled in both vlans and both are reachable by ping. I have an x250e switch. and AP's are 3825i. Any idea?

RE: Print from wireless segment to wired segment is not working

Paul_Russo — Thu, 18 Aug 2016 22:58:00 GMT

Hey Juan

Is the wireless tunneled to controller or locally bridged?

Thanks
P

RE: Print from wireless segment to wired segment is not working

Ronald_Dvorak — Thu, 18 Aug 2016 23:02:00 GMT

Could it be that the print service is working via multicast - that is disabled per default in the WLAN topology.

GUI > VNS > Topologies > select the Topology > select the multicast filters tab
You'd try it out and enable "multicast bridging" and add the "all multicast" + wireless replication.

I had the same issue with my Osram Lightfy (home automation) and with Apple TV.

RE: Print from wireless segment to wired segment is not working

juan_romero — Fri, 02 Sep 2016 22:00:00 GMT

It´s locally bridged. Now I can print but can not scan :S... I did enable "multicast bridging"