topic RE: identifi 802.1x using Windows Server 2012 NPS in ExtremeWireless (Identifi)

identifi 802.1x using Windows Server 2012 NPS

Marlon — Mon, 16 May 2016 17:41:00 GMT

Hi,

we try to configure 802.1x on identifi controller (C35) with Windows NPS. we use CHAP on both controller 802.1x configuration and in NPS but we are receiving error "Response error 66"

thanks in advance.

regards,
marlon

RE: identifi 802.1x using Windows Server 2012 NPS

Doug — Mon, 16 May 2016 17:54:00 GMT

The error code 66 means:

Authentication failed. Either the client computer attempted to use an authentication method that is not enabled on the matching network policy or the client computer attempted to authenticate as Guest, but guest authentication is not enabled. To resolve this issue, ensure that all client computers are configured to use one or more authentication methods that are allowed by matching network policies.

I would suggest taking a look at the following:
https://blogs.technet.microsoft.com/networking/2012/05/30/creating-a-secure-802-1x-wireless-infrastr...

RE: identifi 802.1x using Windows Server 2012 NPS

Doug — Mon, 16 May 2016 17:54:00 GMT

and https://technet.microsoft.com/en-us/library/dd283093(v=ws.10).aspx

RE: identifi 802.1x using Windows Server 2012 NPS

Marlon — Mon, 16 May 2016 20:17:00 GMT

Hi,

thanks. do I need to use certificate?

RE: identifi 802.1x using Windows Server 2012 NPS

Doug — Mon, 16 May 2016 20:27:00 GMT

For PEAP on the MS server, you would want to create a certificate. Even if the clients are setup to not validate the cert.

RE: identifi 802.1x using Windows Server 2012 NPS

Marlon — Wed, 01 Jun 2016 13:17:00 GMT

Hi Doug,

Thanks for the support. already working after your suggestion.

RE: identifi 802.1x using Windows Server 2012 NPS

Ryan_Yacobucci — Tue, 07 Jun 2016 00:42:00 GMT

I think this is typically a problem were the NPS policy doesn't have the correct authentication method configured.

Have you had any luck making this work?

Thanks
-Ryan