topic RE: Ap2660 Login issues, default password not working in ExtremeWireless (Identifi)

Ap2660 Login issues, default password not working

David_Claeson — Wed, 30 May 2018 01:13:00 GMT

I have many legacy ap2660 devices, and they are set to get a dhcp address, then we hard code the wireless controller (via telnet). I have found that many of these devices do not let me log into them with the default admin / new2day credentials. We have not changed the password, and I have held the red reset button down for about 30 seconds. Even after that I still cannot log in. Are there other credentials that I can use to log in, or is there another way to connect to these to perform administration tasks?

Thanks,
Dave

RE: Ap2660 Login issues, default password not working

Hawkins__Bruce — Wed, 30 May 2018 01:17:00 GMT

You could also try using the following: Username: admin / Password: e~=2.718

RE: Ap2660 Login issues, default password not working

Craig_Guilmette — Wed, 30 May 2018 01:18:00 GMT

Hello David the default password for the 2600 series AP's was admin with e~=2.718 as the password

RE: Ap2660 Login issues, default password not working

David_Claeson — Wed, 30 May 2018 01:30:00 GMT

Great thanks!!!!
Is there a way to mark this answered / solved?

RE: Ap2660 Login issues, default password not working

Doug — Wed, 30 May 2018 01:30:00 GMT

All set and marked.