Can a Access Point 505, 3965 work without a XCC Controller?

PaulS1 — Thu, 20 Jan 2022 18:25:00 GMT

Hi i am Paul, i am new here and also in Extreme WLAN. I have a lot of experience in WLAN from other vendors, but not from Extreme.
I does my first installation from a XCC E2120 and AP505 and there rising some questions.
For the E2120 and the AP505 i have to use the "Identifiy" mode, or?
Identify means, the AP is controlled from the Controller, right? Is it also named as "Centralitzed"?
I have a HA E2120 setup, so if one E2120 Controller failed the AP switchover to the secondary Controller. If also the second Controller failed the APs failed also, or?
Is there a way that the APs can work further without the XCC E2120?

I also need a smart way to switch the old 3965 APs in Wing mode controlled (or managed, i don´t know) from a Controller to the new E2120, what are the possibles i can use?

Thanks for your help.

Ciao Paul

RE: Can a Access Point 505, 3965 work without a XCC Controller?

Miguel-Angel_RO — Sun, 23 Jan 2022 22:58:00 GMT

Hi Paul,

Here for your first question: https://extremeportal.force.com/ExtrArticleDetail?an=000081742&q=persistent%20session

For the second question, you can:

SSH the AP and type on the cli:
- cset authip 1 <public IP address of your Wireless Controller)
- capply
- csave
On the Controller go to the AP context and force the new controllers:
- ap
  - 16XXY-1XXX900000
    - aclist 11.22.33.44
    - aclist 11.22.33.55
    - apply
    - exit
You can also perform this via the GUI of the controller in the settings of an AP

They'll appear in the devices list.

Regards

Mig

topic RE: Can a Access Point 505, 3965 work without a XCC Controller? in ExtremeWireless (Identifi)

Can a Access Point 505, 3965 work without a XCC Controller?

RE: Can a Access Point 505, 3965 work without a XCC Controller?