topic RE: how to configure default route in controller C25 in ExtremeWireless (Identifi)

how to configure default route in controller C25

Ashish_Sahu — Tue, 29 Dec 2015 06:50:00 GMT

RE: how to configure default route in controller C25

Ronald_Dvorak — Tue, 29 Dec 2015 07:04:00 GMT

From the controller GUI > Controller > Network > Routing Protocols > new

For a default route set "Destination Address" and "Subnet Mask" to 0.0.0.0 and put 172.129.20.1 in the "Gateway" field.

-Ron

RE: how to configure default route in controller C25

Zdeněk_Pala — Tue, 29 Dec 2015 19:09:00 GMT

Differrent way to do it for admin topology and differrent for physical topology. ip Route add 0.0.0.0 0.0.0.0 1.1.1.1 Apply The above should be for physical. The admin should be through; Topology Admin L3 ... Apply End Apply End ...

RE: how to configure default route in controller C25

Doug — Mon, 04 Jan 2016 19:54:00 GMT

Reference: https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-the-default-route-on-the-...