https://community.extremenetworks.com/t5/extremewireless-identifi/in-service-radar-capacity-question/m-p/39314#M2443 If a customer is deploying a 100AP wireless installation and wants in-service RADAR enabled do you enable RADAR on all APs or is there a general formula that might be used such as 1 in-service radar AP per 5 or 10, etc.? Just thinking about licensing requirements.<BR /> Tue, 13 Oct 2015 20:19:00 GMT Hofman__Jim 2015-10-13T20:19:00Z https://community.extremenetworks.com/t5/extremewireless-identifi/in-service-radar-capacity-question/m-p/39314#M2443 If a customer is deploying a 100AP wireless installation and wants in-service RADAR enabled do you enable RADAR on all APs or is there a general formula that might be used such as 1 in-service radar AP per 5 or 10, etc.? Just thinking about licensing requirements.<BR /> Tue, 13 Oct 2015 20:19:00 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/in-service-radar-capacity-question/m-p/39314#M2443 Hofman__Jim 2015-10-13T20:19:00Z https://community.extremenetworks.com/t5/extremewireless-identifi/in-service-radar-capacity-question/m-p/39315#M2444 On all of them.<BR /> <BR /> APs in an "in-service" scan group will only scan on the channel that the AP is operating on.<BR /> I.e. AP#1 is providing WLAN services on channel#6 - that is also the only channel RADAR is done on.<BR /> <BR /> So you want as many as possible to cover more channels in an area.<BR /> <BR /> -Ron Tue, 13 Oct 2015 22:23:00 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/in-service-radar-capacity-question/m-p/39315#M2444 Ronald_Dvorak 2015-10-13T22:23:00Z