topic RE: Wireless enterasys access point WS-AP3610 in ExtremeWireless (Identifi)

Wireless enterasys access point WS-AP3610

Siva2 — Thu, 01 Sep 2016 19:29:00 GMT

Good day All

my company have buy new AP3610, I need to set it up and add to the exiting access point, all are enterasys access point WS-AP3610.

And this is my first time configure new AP. This AP comes with no manual like give basic set up and give IP address for management.

I have search and found default IP address of 192.168.10.1/24 and this IP address is not working .

I have tried to configure it with following configure

cset ipaddr 192.168.10.3

cset ipmask 255.255.0.0

cset gateway 192.168.10.2

capply

csave

(Wait until the prompt comes back)

reboot

however when I test if I can ping this IP address , I’m getting this error

# ping 192.168.10.3

PING 192.168.10.3 (192.168.10.3): 56 data bytes

ping: sendto: Network is unreachable

can someone help me .

RE: Wireless enterasys access point WS-AP3610

Jeremy_Gibbs — Thu, 01 Sep 2016 23:56:00 GMT

You need a controller to use this AP.

RE: Wireless enterasys access point WS-AP3610

Ronald_Dvorak — Fri, 02 Sep 2016 02:40:00 GMT

- you need to disable DHCP first or the static entry will not work
# cset dhcp disable

- as Jeremy mentioned > you need an WLAN controller to configure the other settings

- in my opinoin you should hire someone to install the APs and give you a basic training
you could find partners here > http://www.extremenetworks.com/partners/
or training > http://www.extremenetworks.com/education/courses/ESE-HI-1/

RE: Wireless enterasys access point WS-AP3610

Siva2 — Fri, 02 Sep 2016 02:40:00 GMT

Thanks Ronald

RE: Wireless enterasys access point WS-AP3610

Ronald_Dvorak — Fri, 02 Sep 2016 02:40:00 GMT

no problem - did it work with the DHCP disable command ?

RE: Wireless enterasys access point WS-AP3610

Zdeněk_Pala — Fri, 02 Sep 2016 10:12:00 GMT

The AP3610 does require controller for configuration and monitoring. When the AP is configured the controller is not needed (some exceptions are there). The controller must be version 9.X maximum. The version 10 is not compatible with AP3610. As Ronald mentioned the help from trained/experienced person is good way to go.

RE: Wireless enterasys access point WS-AP3610

n_n__n_n_ — Fri, 02 Sep 2016 12:08:00 GMT

It´s year 2016 und you purschased =>new<= AP3610 access points? Hint: They are rather old and software version 9.* will be the last major software release for them. You cannot use version 10.x and up