https://community.extremenetworks.com/t5/extremewireless-identifi/setting-an-access-point-up-for-site-survey/m-p/41378#M2967 How many access points will you be using for the survey? Thu, 03 Sep 2015 08:13:00 GMT Doug 2015-09-03T08:13:00Z https://community.extremenetworks.com/t5/extremewireless-identifi/setting-an-access-point-up-for-site-survey/m-p/41377#M2966 Hi I am configuring an Access point for doing my first site survey with extreme access points one of the steps is to Set both radios to a desired channel and max power. Is there a reason why the radios have to be at max power 14dbm will this not lead to issues with over lap <BR /> <BR /> Does anyone have a recommendation or a reason why the radios should be at max power<BR /> <BR /> Thanks for any replies<BR /> <BR /> Thu, 03 Sep 2015 08:09:00 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/setting-an-access-point-up-for-site-survey/m-p/41377#M2966 Declan_Liddy 2015-09-03T08:09:00Z https://community.extremenetworks.com/t5/extremewireless-identifi/setting-an-access-point-up-for-site-survey/m-p/41378#M2967 How many access points will you be using for the survey? Thu, 03 Sep 2015 08:13:00 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/setting-an-access-point-up-for-site-survey/m-p/41378#M2967 Doug 2015-09-03T08:13:00Z https://community.extremenetworks.com/t5/extremewireless-identifi/setting-an-access-point-up-for-site-survey/m-p/41379#M2968 I will be using one with a power pack and move it around the floor using air magnet to do the survey Thu, 03 Sep 2015 08:17:00 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/setting-an-access-point-up-for-site-survey/m-p/41379#M2968 Declan_Liddy 2015-09-03T08:17:00Z https://community.extremenetworks.com/t5/extremewireless-identifi/setting-an-access-point-up-for-site-survey/m-p/41380#M2969 Are you verifying measurements based on a predictive plan and need to set the channel and tx power according to the plan or are you just looking for signal propagation based on where the AP is located? Thu, 03 Sep 2015 08:24:00 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/setting-an-access-point-up-for-site-survey/m-p/41380#M2969 Doug 2015-09-03T08:24:00Z https://community.extremenetworks.com/t5/extremewireless-identifi/setting-an-access-point-up-for-site-survey/m-p/41381#M2970 I will be doing a physical survey moving the ap around the floor to different positions and taking readings with air magnet to make sure I have -67 db coverage on the whole floor Thu, 03 Sep 2015 08:30:00 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/setting-an-access-point-up-for-site-survey/m-p/41381#M2970 Declan_Liddy 2015-09-03T08:30:00Z