topic RE: Third party AP support in ExtremeWireless (Identifi)

Third party AP support

Andre_Brits_Kan — Fri, 12 Jun 2015 00:36:00 GMT

Hi guys

I have configured a physical interface for third party AP's as per the attached screenshot.

I then create the Wlan 3rd party service but am a bit lost as to how this mapps to a outbound topology.

I currently have 2 ISP's connected to esa1 on different vlans.
I would like to map the thrid party AP's traffic to one of the ISP vlans.

With a normal WLAN service I can set the B@HWC topology af default or apply a role that B@HWC.

With the third party WLAN you can not assign a topology.

Any assistance on how the thrid party AP works and how to configure it.

Thx

Andre

RE: Third party AP support

Andre_Brits_Kan — Fri, 12 Jun 2015 00:50:00 GMT

RE: Third party AP support

Doug — Mon, 18 Apr 2016 16:50:00 GMT

Review: https://community.extremenetworks.com/extreme/topics/wireless_controller_manage_and_configure_of_thi...

RE: Third party AP support

Umut_Aydin — Wed, 27 Apr 2016 19:46:00 GMT

Via a third party VNS you can apply access rules/filters to wireless traffic running over a parallel wireless network but our controllers do not manage non-EXTR APs