topic RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch in ExtremeWireless (Identifi)

AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

JohanHendrikx — Thu, 21 Jun 2018 11:23:00 GMT

I have more than 50 AP 3805i connected at X440G2-24p-10G4 and X440G2-48p-10G4 switches.

One AP connect with 100 mb instead of 1Gb.

Port settting on the switch is auto. Also at the AP.

I noticed that the interface setting on the AP is 10 or 100 Mb and not 1Gb??.

I already cleared the config of the AP but it stays 100 Mb

Other AP’s connect with 1Gb.

RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

Aman — Thu, 21 Jun 2018 11:33:00 GMT

Hi johan,

did you reset the AP?
from where you see your AP is showing low link speed?

RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

Aman — Thu, 21 Jun 2018 11:33:00 GMT

It could be due to cable fault also!!
please check once and do the factory default AP.

RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

Ronald_Dvorak — Thu, 21 Jun 2018 11:33:00 GMT

I agree, check the cabling...

RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

Zdeněk_Pala — Thu, 21 Jun 2018 11:37:00 GMT

If you move that AP to different port, will that change? If you swap AP with other AP in the same port. Will that change?

RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

Aman — Thu, 21 Jun 2018 11:37:00 GMT

i don't think it will work, bcz all remaining APs except this AP are working on gig link.

RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

JohanHendrikx — Thu, 21 Jun 2018 11:49:00 GMT

I did a reset of the AP. I see the slow link in the dashboard and on the switch. I will check the cabling.

RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

Aman — Thu, 21 Jun 2018 11:49:00 GMT

do you have any WLC?

RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

Aman — Thu, 21 Jun 2018 11:49:00 GMT

one thing you can also try just manually configure the link speed for that APs.

RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

JohanHendrikx — Thu, 21 Jun 2018 11:49:00 GMT

The link speed will be 10 Mb of 100 Mb. I cann't select 1Gb

RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

Aman — Thu, 21 Jun 2018 11:49:00 GMT

on switch you can configure the Speed for that particular port.
"configure port auto off speed < speed > duplex "
like this.

RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

Rey_Juan_Carlos — Thu, 21 Jun 2018 11:49:00 GMT

you'll have to check the cable, a lot of times we see problems with the cable category.

RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

JohanHendrikx — Mon, 02 Jul 2018 19:13:00 GMT

cable is replaced and teh connection is 1GB. Thanks all

RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

Doug — Thu, 12 Jul 2018 00:13:00 GMT

Reference : https://gtacknowledge.extremenetworks.com/articles/Solution/AP-s-are-listed-in-the-AP-s-with-uplink-...