topic bandwith per user on identifi login on captive portal in ExtremeWireless (Identifi)

bandwith per user on identifi login on captive portal

Eloy_Acosta — Mon, 04 Jun 2018 22:43:00 GMT

we have implemented and external captive portal that relies on an external RADIUS to make the final autihentication.

The login works and the identifi system get some parameters from our RADIUS like Session-timeout and Iddle-timeout

with others sistems we use some parameters WISPr-Bandwidth-Max-Up or WISPr-Bandwidth-Max-Down sometimes the are Vendor Especific attributes wich could be used.

my answer is theres some way we could possibly send from or RADIUS to identifi some parameter to make a bandwith control for that specific logged username?

The are some VSA to make bandwith control from RADIUS?
Maybe we could point to a rol/profile previosuly configured on identifi?

RE: bandwith per user on identifi login on captive portal

Hawkins__Bruce — Mon, 04 Jun 2018 22:48:00 GMT

You would define a Bandwidth profile Globally in the VNS area (you can define multiple) and then you would create a Class of Service (CoS) that applies the Bandwidth profile you desire for either outbound traffic or inbound, or both. That resultant CoS can be applied to a WLAN service as a whole, or it can be applied to a specific Role ... that you could assign to a specific user or groups of users via RADIUS in the form of a Filter-ID passed back to the controller upon successful authentication for the client.

Additionally, you can apply any CoS (and and bandwidth limiting that has been defined in it) to any individual Policy Rule that is defined for any given Role.

The bandwidth limiting will apply to each individual user in any of the above cases ... and not per WLAN or SSID.

Hope this helps.

RE: bandwith per user on identifi login on captive portal

Gareth_Mitchell — Tue, 05 Jun 2018 13:27:00 GMT

Hi

Further to the comments above, see these documents:

Create the class of service(s) you require:

https://documentation.extremenetworks.com/wireless/v10_41/UG/Wireless/User_Guide/c_classes_of_service_overview.shtml

Assign the COS to a role:

https://documentation.extremenetworks.com/wireless/v10_41/UG/Wireless/User_Guide/c_roles_overview.shtml

Return the role via radius:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-assign-users-to-different-Roles-based-on-RADIUS-credentials-on-NPS-Server

-Gareth