https://community.extremenetworks.com/t5/extremewireless-identifi/ap3917e-configuration-failed-with-error/m-p/44532#M3757 I think you are too fast for the software department !<BR /> The AP3917e requires V10.41.02 on the EWC.<BR /> Currently available is max. 10.41.01.82. The release notes of this does not include AP3917.<BR /> <BR /> br<BR /> Volker Fri, 10 Nov 2017 21:27:00 GMT Volker_Kull 2017-11-10T21:27:00Z https://community.extremenetworks.com/t5/extremewireless-identifi/ap3917e-configuration-failed-with-error/m-p/44529#M3754 Good Afternoon, I have a Controller V2110 V10.41.<BR /> <BR /> I received this error during the installation of AP3917e<BR /> <BR /> Config Manager has experienced an error which has prevented it from properly processing a request. CM will continue running, however this error may be an indicator of a larger system problem. Error Details:AP[1736Y-1544600000] reported at least one configuration item to be invalid. The erroneous encoded configuration item is: 00A500080000008100A60008A9FE003D00A70008FFFFC000<BR /> <BR /> I've opened a ticket just now<BR /> <BR /> Have you ever seen this error ?<BR /> <BR /> Thanks<BR /> Giuseppe<BR /> Fri, 10 Nov 2017 21:16:00 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/ap3917e-configuration-failed-with-error/m-p/44529#M3754 Giuseppe_Montan 2017-11-10T21:16:00Z https://community.extremenetworks.com/t5/extremewireless-identifi/ap3917e-configuration-failed-with-error/m-p/44530#M3755 is the correct external antenna set ?<BR /> <BR /> if you think there is no config error just factory reset the AP and delete it from the database - might be that there is some wrong entry in the DB. Fri, 10 Nov 2017 21:20:00 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/ap3917e-configuration-failed-with-error/m-p/44530#M3755 Ronald_Dvorak 2017-11-10T21:20:00Z https://community.extremenetworks.com/t5/extremewireless-identifi/ap3917e-configuration-failed-with-error/m-p/44531#M3756 Did you mean AP3915e or actually AP3917e? <BR /> <BR /> What is the actual firmware revision you're running? AP3917e is not yet released for General availability and will be supported with 10.41.02, which is targeting GA in two weeks. <BR /> <BR /> Fri, 10 Nov 2017 21:27:00 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/ap3917e-configuration-failed-with-error/m-p/44531#M3756 Paulo_Francisco 2017-11-10T21:27:00Z https://community.extremenetworks.com/t5/extremewireless-identifi/ap3917e-configuration-failed-with-error/m-p/44532#M3757 I think you are too fast for the software department !<BR /> The AP3917e requires V10.41.02 on the EWC.<BR /> Currently available is max. 10.41.01.82. The release notes of this does not include AP3917.<BR /> <BR /> br<BR /> Volker Fri, 10 Nov 2017 21:27:00 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/ap3917e-configuration-failed-with-error/m-p/44532#M3757 Volker_Kull 2017-11-10T21:27:00Z https://community.extremenetworks.com/t5/extremewireless-identifi/ap3917e-configuration-failed-with-error/m-p/44533#M3758 I forgot to mention, that software engineers should be aware of this situation - which could happen with every new hardware and code - and optimize the error checking and output for that ...<BR /> It´s a never ending story about that ...<BR /> <BR /> Volker Fri, 10 Nov 2017 21:27:00 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/ap3917e-configuration-failed-with-error/m-p/44533#M3758 Volker_Kull 2017-11-10T21:27:00Z https://community.extremenetworks.com/t5/extremewireless-identifi/ap3917e-configuration-failed-with-error/m-p/44534#M3759 I've to ask sorry, the correct AP is 3915 not 3917,<BR /> I resetted the AP to factory default and now is working correctly.<BR /> <BR /> Thanks and sorry for the mistake<BR /> <BR /> Bye Giuseppe<BR /> Fri, 10 Nov 2017 22:26:00 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/ap3917e-configuration-failed-with-error/m-p/44534#M3759 Giuseppe_Montan 2017-11-10T22:26:00Z