topic Enable availibilty at C5210 and have problem to view atatus in ExtremeWireless (Identifi)

Enable availibilty at C5210 and have problem to view atatus

Mikaeil_Beigpou — Sun, 10 Sep 2017 10:22:00 GMT

I have two C5210 wireless controller and Enable Availibility and some AP status is at EWC1 is inactive and at other EWC (EWC2) is Active.
the other Problem is I cannot Reboot AP by Controller.
please help me to solve this problems.

thanks

RE: Enable availibilty at C5210 and have problem to view atatus

Ronald_Dvorak — Sun, 10 Sep 2017 22:25:00 GMT

I strongly suggest that you attend the official training to learn more about the controller functions...

http://www.extremenetworks.com/education/courses/ESE-HI-1/

Let's assume you run v10 as you didn't mentioned the installed software version.
On controller#2 in the GUI > AP > APs > Foreign > select all > Actions > Release

That should terminate the tunnel from controller#2 to the APs and the APs should open a tunnel to controller#1

Cheers,
Ron

RE: Enable availibilty at C5210 and have problem to view atatus

Mikaeil_Beigpou — Mon, 11 Sep 2017 08:49:00 GMT

thanks