topic RE: C5210 Wireless Controller SNMP v3 User Access in ExtremeWireless (Identifi)

C5210 Wireless Controller SNMP v3 User Access

Andre_Brits_Kan — Mon, 19 Dec 2016 14:39:00 GMT

Hi Community

I have a quick question regarding SNMP v3 Users on a wireless controller.

On the switches I can create SNMPv3 group with read or Write access and add users to the group, on the wireless controller I do not see where I can set restriction on a user.

I would like to create two users one with read only access and another with read write access.

Any idea?

RE: C5210 Wireless Controller SNMP v3 User Access

Ariyakudi_Srini — Mon, 19 Dec 2016 15:42:00 GMT

Hi Andre,

Try the below link for the controller SNMPv3 configuration and check if it helps,

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-SNMPv3-on-V2110

RE: C5210 Wireless Controller SNMP v3 User Access

Andre_Brits_Kan — Mon, 19 Dec 2016 17:36:00 GMT

Hi Aliyakudi

Thank you for the link but this still only refers to creating SNMP v3 users.
I would like to create multiple SNMPv3 users, one with Read only access and another user with Read/Write Access.

thx

RE: C5210 Wireless Controller SNMP v3 User Access

Gareth_Mitchell — Thu, 23 Feb 2017 21:45:00 GMT

Just to close this one out, a feature request to allow RO snmpv3 access has been submitted and is under consideration.

-Gareth