topic Wireless Controller seems not tag vlans in ExtremeWireless (Identifi)

Wireless Controller seems not tag vlans

David1 — Wed, 09 Aug 2017 18:46:00 GMT

Hello

we want to use vlan tagging via wireless controller. The Management vlan should be untagged and the Client should be tagged.

the ExtremeWireless (IdentiFi) has the option to tag vlans. But all traffic falls into the untagged (native). An Extreme access point is connected to a Cisco Switch. Is there a Special configuration nessesary for the Cisco Switch to build a trunk to the access point?

Thanks for any help.

Greetings

RE: Wireless Controller seems not tag vlans

Ronald_Dvorak — Wed, 09 Aug 2017 18:48:00 GMT

No, there is nothing special, you just need to do it right.

RE: Wireless Controller seems not tag vlans

Doug — Wed, 09 Aug 2017 18:51:00 GMT

The B@AP topologies for users just need to be tagged, the port the ap is plugged in to should be tagged as well for the same VLAN ID.

RE: Wireless Controller seems not tag vlans

Doug — Wed, 09 Aug 2017 18:51:00 GMT

RE: Wireless Controller seems not tag vlans

David1 — Thu, 10 Aug 2017 09:41:00 GMT

@Hyde: This configuration is done for the Client traffic. The Management port for the access point should be in another vlan. The port on the Cisco Switch is configured as trunk with the client vlan id as trunk vlan and the Management vlan as native vlan (untagged). Is this correct?

RE: Wireless Controller seems not tag vlans

Doug — Thu, 10 Aug 2017 09:41:00 GMT

Correct.