topic RE: Show used topology in EWC client report? in ExtremeWireless (Identifi)

Show used topology in EWC client report?

htw — Mon, 06 Mar 2017 17:18:00 GMT

Hi,
how can I see at EWC Client Report which topology (group) /VLAN a wireless client uses?

I currently use EWC 10.21.01.0065 and client report shows only EWCs role for this client. In our installation the used VLAN is decided by NACs policy mapping table with policy roles and VLAN IDs.

RE: Show used topology in EWC client report?

Umut_Aydin — Mon, 06 Mar 2017 20:46:00 GMT

Hi,

you can only see the PVID .
That's the topolgy that the user had and this is tied to the certain VLAN.

There is no VLAN # data available only this binding.

Regards
Umut Aydin

RE: Show used topology in EWC client report?

htw — Mon, 06 Mar 2017 20:55:00 GMT

Hi,
i dont see a PVID in client report (please see attached picture). Is there an option which I have to set up?

RE: Show used topology in EWC client report?

Umut_Aydin — Mon, 06 Mar 2017 23:42:00 GMT

Hi,

sorry for the confusion..they removed PVID it in the 10.21.

I made a quick search in my lab and they was on 10.11 and 9.21.
And here you can always see the PVID but in the 10.21 not.

I will check if this is volitional in that version ?!

But in any case you don't have the VLAN info directly.

If so you have like you said only the Role and with that the binding to the Topology = VLAN.

Regards

Umut Aydin

RE: Show used topology in EWC client report?

htw — Tue, 07 Mar 2017 14:48:00 GMT

Hi,
to see the topology (group) or PVID would be enough.

To see only role is not enough since with NAC policy mapping, users with same role can land in different topology groups.

RE: Show used topology in EWC client report?

Umut_Aydin — Wed, 08 Mar 2017 17:08:00 GMT

Hi,

all what we can do is to create a Feature Request for this.

Could you pease open a case with GTAC and ask for a C4 Feature Request.

Thanks

Regards

Umut Aydin

RE: Show used topology in EWC client report?

htw — Wed, 08 Mar 2017 19:15:00 GMT

Feature request created.
Thank you

RE: Show used topology in EWC client report?

Umut_Aydin — Fri, 10 Mar 2017 17:02:00 GMT

Can you please post the case # so we can follow this as well.

Thanks

:-)

RE: Show used topology in EWC client report?

Ronald_Dvorak — Fri, 10 Mar 2017 17:02:00 GMT

Would be great if Extreme could also take the suggestion from the following post into acount to improve the current view.....

https://community.extremenetworks.com/extreme/topics/extremewireless-v10-21-reports-gone-new-reports

-Ron

RE: Show used topology in EWC client report?

htw — Mon, 13 Mar 2017 14:03:00 GMT

Hi,
Case is #01297914

RE: Show used topology in EWC client report?

htw — Mon, 13 Mar 2017 16:57:00 GMT

Hmm, I can't see this case number in my case archive. Is this common for feature request cases?

RE: Show used topology in EWC client report?

Ram3 — Mon, 13 Mar 2017 16:57:00 GMT

Yes, Feature Request are not visible in your case archive. You can use the FR number for communication.

RE: Show used topology in EWC client report?

Ronald_Dvorak — Mon, 13 Mar 2017 16:57:00 GMT

A case that I can't track in the case portal - welcome to 2017.