topic RE: Identifi: proper topology configuration for branches in ExtremeWireless (Identifi)

Identifi: proper topology configuration for branches

Ilya_Semenov — Wed, 25 Oct 2017 00:34:00 GMT

Hello, everybody!

I am testing Identify in a bank.

It has HQ (where@EWC works) and several branches, connected to HQ with VPN. There is a direct visibility - I can ping resources in braches from HQ.

All branches has their own Internet gateway and I don't want HQ to be gateway for branche's wifi users traffic. So, it seems that@AP topology would be the most suitable.

The problem is there is no VLANs in branches. It's a small /24 networks.

But Identify doesn't allow me to create several topologies in VLAN 1. And it can't change network equipment in braches to new ones, which support dot1q subinterfaces. How can I separate branches' networks?

Is there any solution?

Many thanks in advance,

ILya

RE: Identifi: proper topology configuration for branches

Craig_Guilmette — Wed, 25 Oct 2017 00:37:00 GMT

Hello

Just use the B@AP untagged topology that comes with the controller by default. It will put all users directly into the local vlan that the AP port is configured for.

RE: Identifi: proper topology configuration for branches

Ilya_Semenov — Wed, 25 Oct 2017 00:37:00 GMT

Thanks, Craig,

I'll try to do that tomorrow.