topic RE: Check the performance of an AP depending on the power it recieves in ExtremeWireless (Identifi)

Check the performance of an AP depending on the power it recieves

Cornel_Smit — Tue, 20 Feb 2018 13:40:00 GMT

Hi Guys

Is there a way to see what performance the AP gives depending on the power it receives.
I know the 3935 will transmit on 2x2 when it only gets 15w power and 4x4 on 25w.
But is there a place to confirm it is broadcasting at that either via the Gui on the controller or the CLI of the AP.

Regards

RE: Check the performance of an AP depending on the power it recieves

Sam — Tue, 20 Feb 2018 15:14:00 GMT

Hi Cornel,

From the home screen on the GUI you are able to view AP's that are in low power mode in the health table.

Hope this helps.

Best regards,
Sam

RE: Check the performance of an AP depending on the power it recieves

Cornel_Smit — Tue, 20 Feb 2018 15:35:00 GMT

Hi Sam

Thanks for that.

I completely forgot about that......
Been a long 2 weeks.

Regards