topic RE: Monitoring concurrent clients per SSID/VNS with SNMP in ExtremeWireless (Identifi)

Monitoring concurrent clients per SSID/VNS with SNMP

n_n__n_n_ — Tue, 25 Aug 2015 11:25:00 GMT

Hello,

I ́d like to monitor the amount of concurrent connected clients for each SSID/VNS

(I saw https://community.extremenetworks.com/extreme/topics/wifi-controller-enterasys-identifi-c4110-2-numb... but cannot find the corresponding OID).

It would be great if someone could point me to the right one.

Regards

RE: Monitoring concurrent clients per SSID/VNS with SNMP

Ronald_Dvorak — Tue, 25 Aug 2015 13:21:00 GMT

Hi n.n.n.n. 🙂

you'd do a query for "wlanSSID=1.3.6.1.4.1.4329.15.3.3.4.4.1.5" which show the SSID name and the internal ID number for that WLAN service.

Then perform a query "wlanStatsAssociatedClients=1.3.6.1.4.1.4329.15.3.3.4.5.1.2" and that shows the WLAN service ID with the associated clients.

So in the below example my SSID SercureAccess (instance#105) has currently 10 clients connected to it.

-Ron

RE: Monitoring concurrent clients per SSID/VNS with SNMP

n_n__n_n_ — Tue, 25 Aug 2015 15:07:00 GMT

Great. Thanks

Regards
n.n. n.n. Chris

RE: Monitoring concurrent clients per SSID/VNS with SNMP

Ryan_Mathews — Tue, 25 Aug 2015 19:39:00 GMT

Welcome to the Hub Chris. Glad you crossed in to our purple community!

RE: Monitoring concurrent clients per SSID/VNS with SNMP

n_n__n_n_ — Sat, 05 Sep 2015 13:16:00 GMT

Hello again,

I ́m still fighting with NetSight. I actually want to poll the OID permanently, night and day in order to get some nice reports out of it. Within FlexView I can actually start the polling*. But I want that one to be permanent and the data should be available within OneView reporting.

Within OneView I can go to Devices => View => FlexView, but I cannot see the Flexview I created within Console. (According to http://nms.extremewireless.ca:8080/Clients/help/content/oneview/docs/ov_ht_flx_vw_web.html
"Select a FlexView from the drop-down menu, or enter all or part of the FlexView name to find a matching view. Any FlexView configured in Console is listed for selection, including standard FlexViews and custom FlexViews you create.") => My custom FlexView isn ́t displayed there.

Any hints would be great.

Regards,
Chris

UPDATE:
I just noticed, that I can get those values within OneView => Custom Reports => "Target: Wireless MZ, Groups, SSIDs" => WLAN associated clients

*

RE: Monitoring concurrent clients per SSID/VNS with SNMP

Ronald_Dvorak — Sat, 05 Sep 2015 19:41:00 GMT

I've run into the same issue in the past and opened a GTAC ticket.

In short...Flexviews that you create are only stored on your local PC.

Here the solution to share it with all Netsight users..

GTAC:
Flexview needs to be moved to the server to the /NetSight/Appdata/System/Flexviews/My Flexviews directory.
Server and client then need to be restarted.
The flexviews in this directory will not be removed on upgrade, if put into one of the other folders the upgrade will remove the flexview.

RE: Monitoring concurrent clients per SSID/VNS with SNMP

Ronald_Dvorak — Sat, 05 Sep 2015 19:41:00 GMT

https://gtacknowledge.extremenetworks.com/articles/How_To/Adding-Flexviews-for-use-in-Oneview/