topic how to active access point ws-ap3805i connect to wireless controller c35 in ExtremeWireless (Identifi)

how to active access point ws-ap3805i connect to wireless controller c35

sabou_Doumbia — Mon, 05 Mar 2018 16:58:00 GMT

how to active access point ws-ap3805i connect to wireless controller c35

RE: how to active access point ws-ap3805i connect to wireless controller c35

AntonS — Mon, 05 Mar 2018 17:20:00 GMT

is that ap connected over WAN/VPN? is a ping from ap to ewc possible?
if yes check AP -> Static configuration -> Tunnel MTU and lower that value eg 1300 instead of 1500

RE: how to active access point ws-ap3805i connect to wireless controller c35

sabou_Doumbia — Mon, 05 Mar 2018 17:20:00 GMT

hi ,
No ping AP it not possible
and I change MTU but no result.

RE: how to active access point ws-ap3805i connect to wireless controller c35

Ronald_Dvorak — Mon, 05 Mar 2018 18:55:00 GMT

Hi, the screenshot shows an AP3825i and not an AP3805i.

Because you don't provide any details about the steps you've performed or i.e. a network diagram I don't see any chance to help you..... i.e. the AP in the screenshot could be manualy added or it was discovered which is a big difference.

The best advice I'd give you is to pay a Extreme Partner to install/configure it for you and also give a brief workshop so you'd perform configuration in the future by yourself.

BR,
Ron

RE: how to active access point ws-ap3805i connect to wireless controller c35

Umut_Aydin — Tue, 06 Mar 2018 20:15:00 GMT

Hi,

check out your license..I hope it's not in a DEMO mode?
Need enter a eval license or get a valid license.

Regards
Umut Aydin

RE: how to active access point ws-ap3805i connect to wireless controller c35

Umut_Aydin — Tue, 06 Mar 2018 20:16:00 GMT

Hi,

if AP3805 in question ..seee please this one.
https://gtacknowledge.extremenetworks.com/articles/Q_A/Minimum-firmware-version-for-WS-AP3805

Rgds
Umut Aydin