topic RE: 3912i with eddystone not working in ExtremeWireless (Identifi)

3912i with eddystone not working

Andre_Brits_Kan — Fri, 25 May 2018 12:03:00 GMT

Hi Community

With the last few Firmware releases for Extreme Wireless (V2110) the IOT radio can select iBeacon, Eddystone or Thread Gateway.

I want to play with the Eddystone-Url feature.
The issue I have is that when I select the Eddystone-URL the IOT light never turns on and I never discover the Radio.

When I select iBeacon the IOT light turns on and I can discover the IOT Radio.

The light also turns on when I select Thread-Gateway.

Any idea?

The firmware I am using is the latest : V10.41.07.0014-1

Thx

RE: 3912i with eddystone not working

Ronald_Dvorak — Fri, 25 May 2018 14:56:00 GMT

Hey Andre,

I run the same version, I configured the url from the example on Github and it works fine as far as I'd see.....

https://github.com/google/eddystone/blob/master/eddystone-url/README.md#eddystone-url-http-url-encod...

What url do you use - I'd try the same on my AP.

RE: 3912i with eddystone not working

Andre_Brits_Kan — Fri, 25 May 2018 14:58:00 GMT

Thx for the feedback Ronald.
Would you be able to confirm if the IoT light was on when you select this option?

RE: 3912i with eddystone not working

Ronald_Dvorak — Fri, 25 May 2018 14:58:00 GMT

Here my AP with Eddystone enabled, I think it's the first LED (too lazy to check the manual)....

RE: 3912i with eddystone not working

Andre_Brits_Kan — Fri, 25 May 2018 14:58:00 GMT

perfect yes your IoT light is on