topic RE: Access Point Firmware in ExtremeWireless (Identifi)

Access Point Firmware

David31 — Thu, 02 Nov 2017 20:55:00 GMT

Hey guys, I think I know the answer but need confirmation
we have 2 wireless controllers. One is a failover to the other. I upgraded Controller 1 from V9 to V10 and upgraded the AP's.
Controller 2 is still on the old V9 code. The upgraded AP's no longer see controller 2 as a backup tunnel. Is it because of the firmware difference?

RE: Access Point Firmware

Scott_Van_Arts1 — Thu, 02 Nov 2017 21:12:00 GMT

As I understand it you are correct.

RE: Access Point Firmware

David31 — Sat, 04 Nov 2017 02:03:00 GMT

Awesome, I upgraded the 2nd controller today and noticed backup tunnel from controller 1 AP's were re-established to controller 2. Thanks!

RE: Access Point Firmware

Bin — Sat, 04 Nov 2017 03:38:00 GMT

Hello David,

Kindly reference you our recommend procedures for upgrading Two Controllers in Availability Mode.

http://documentation.extremenetworks.com/wireless/v10_41/mg/Wireless/Maintenance_Guide/t_upgrading_t...

Best regards
Bin