topic RE: AP 3805i (status LED) in ExtremeWireless (Identifi)

AP 3805i (status LED)

agd — Fri, 04 Sep 2015 20:54:00 GMT

I have remotes 3805i APs and the status LED it's always blinking, the radio LED it's ok, bur I don't see deployed SSIDs.

Why can be the led blinking ?

Thanks

RE: AP 3805i (status LED)

Ronald_Dvorak — Fri, 04 Sep 2015 20:59:00 GMT

Is the AP up on the controller, check GUI > Reports > Active APs

Which controller version is loaded on the controller ?

-Ron

RE: AP 3805i (status LED)

Doug — Fri, 04 Sep 2015 21:00:00 GMT

Take a look at the User Guide under LED status...

https://extranet.extremenetworks.com/downloads/Pages/dms.ashx?download=c2513a5a-1186-4e25-ae97-dc9e1...

Flashing Green Indicates: • running a self test • loading software program
Solid is normal mode...

If all the LED's are blinking together it means you have it in identify mode...

RE: AP 3805i (status LED)

agd — Fri, 04 Sep 2015 23:53:00 GMT

Thanks, I had a problem with routes at the controller side so the AP was unable to register, and that was the blinked led.

RE: AP 3805i (status LED)

Doug — Sat, 05 Sep 2015 01:29:00 GMT

Thanks for following up.

RE: AP 3805i (status LED)

Haseeb_Raza — Wed, 18 Oct 2017 21:28:00 GMT

i have the same problem. AP 3825i is running perfectly with the same configuration but AP 3805i does not. it shows connected to the controller but ssids are not broadcasted it shows not available in the radio 1 and radio 2 tabs with the wlan name written.

RE: AP 3805i (status LED)

Doug — Wed, 18 Oct 2017 21:43:00 GMT

Check your controller report (active AP) to see if the controller has the ap up and online. You should contact the GTAC if you get stuck, they will sort this out.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-contact-Extreme-Networks-Global-Tec...