topic RE: role not working after upgrade to V9.15.06 in ExtremeWireless (Identifi)

role not working after upgrade to V9.15.06

Ronald_Dvorak — Tue, 26 May 2015 21:26:00 GMT

Just in case you run into the same issue....

After upgrading to latest code v9.15.06 our guest non-auth role wasn't working anymore = clients get no IP.

This role was working before...

We've changed it as below as a workaround - ticket will be opened ASAP...

RE: role not working after upgrade to V9.15.06

Drew_C — Wed, 27 May 2015 03:15:00 GMT

Hi Ron,
Thank you for posting this! I'll find your case and ask the GTAC Engineer to write a knowledge article on this and share the link.

-Drew

RE: role not working after upgrade to V9.15.06

Doug — Wed, 27 May 2015 20:43:00 GMT

We are working on it now...

-Doug

RE: role not working after upgrade to V9.15.06

hsachse — Wed, 27 May 2015 20:43:00 GMT

Discovery another in release 9.15.06.0010 bug in yesterday: If you try to delete a topology under "Controller -> Network -> Topology" an strange name appear in the delete popup message and if you click ok the topogly isn't removed.

Maybe you could try to reproduce it.

RE: role not working after upgrade to V9.15.06

Doug — Wed, 27 May 2015 20:43:00 GMT

Sure, I think I have seen that in testing but I'm not sure if I have replicated that again. I will try it here too and let you know.

RE: role not working after upgrade to V9.15.06

hsachse — Wed, 27 May 2015 20:43:00 GMT

Its not critical. Deleting under VNS -> ... still working correct.

RE: role not working after upgrade to V9.15.06

Doug — Wed, 27 May 2015 20:43:00 GMT

Thanks, once we get it defined/corrected I will post the GTAC Knowledge article link here....

RE: role not working after upgrade to V9.15.06

Doug — Wed, 27 May 2015 20:43:00 GMT

Seems to be working, I'm running a chrome browser (Version 43.0.2357.73 beta-m). I will test with other browsers too...

RE: role not working after upgrade to V9.15.06

Doug — Wed, 27 May 2015 20:43:00 GMT

Firefox: 34.0.5

RE: role not working after upgrade to V9.15.06

Ronald_Dvorak — Wed, 27 May 2015 20:43:00 GMT

nice message.. the controller will "destroy" the certificate -I think a delete would be enough 🙂

RE: role not working after upgrade to V9.15.06

Doug — Wed, 27 May 2015 20:43:00 GMT

We like to be dramatic....

RE: role not working after upgrade to V9.15.06

Doug — Wed, 27 May 2015 20:43:00 GMT

...and Windows Explorer... Version 10.0.9200.17357

RE: role not working after upgrade to V9.15.06

Doug — Wed, 27 May 2015 20:43:00 GMT

If you wouldn't mind can you try a different browser and let me know if you get the same results.

RE: role not working after upgrade to V9.15.06

Doug — Thu, 28 May 2015 20:01:00 GMT

Ron,

I have the configuration matched, I'm just updating the code on my controller to 9.15.06 now. I will let you know the results shortly.

-Doug

RE: role not working after upgrade to V9.15.06

Doug — Thu, 28 May 2015 21:08:00 GMT

I see the same issue in my lab, I will find out what changed in the design between code versions.

RE: role not working after upgrade to V9.15.06

Doug — Thu, 28 May 2015 22:18:00 GMT

For anyone tracking this issue.

Once the resolution is known it will be added to this GTAC knowledge article...
https://gtacknowledge.extremenetworks.com/articles/Solution/Guest-Portal-stops-working-after-upgrading-to-9-15-06-firmware

RE: role not working after upgrade to V9.15.06

Ryan_Mathews — Thu, 28 May 2015 22:18:00 GMT

Nice work Doug.

For anyone that wants to track this, you can follow this thread. Click "Follow" at the top right of your page.

Long-term, we want to allow you to track articles as they progress. Don't have that capability today....but working on it.

When the GTAC sorts this out officially, the GTAC Knowledge article will reflect. In Doug Hyde we trust!