topic RE: Remote Port Required in ExtremeWireless (Identifi)

Remote Port Required

Terren_Crider — Wed, 24 Jan 2018 21:38:00 GMT

I'm reconfiguring a wireless network and have run into an issue. Currently the network is set up as a /16 subnet and I'm reducing it to a /22. I changed the gateway device's mask to /22, but when I try to change the controller's mask it tells me that "The Remote Port is Required". What am I missing here?

RE: Remote Port Required

Terren_Crider — Wed, 24 Jan 2018 21:40:00 GMT

Well... It appears that the problem was the Synchronize checkbox. I had to uncheck it since this topology does not exist on my other controller.

RE: Remote Port Required

Steve_Ballantyn — Wed, 24 Jan 2018 21:40:00 GMT

That's funny. I had this same issue. But when I saw you post this error message I was racking my brain about what I did to get that message.

RE: Remote Port Required

Doug — Wed, 24 Jan 2018 21:40:00 GMT

Reference: https://gtacknowledge.extremenetworks.com/articles/Solution/ExtremeWireless-Error-when-saving-a-port...