topic RE: AP3865E Antenna WS-AODT05120N installation in ExtremeWireless (Identifi)

AP3865E Antenna WS-AODT05120N installation

Renne_Stuart — Wed, 13 May 2015 13:56:00 GMT

We have purchased AP3865E with Antenna WS-AODT05120N and have read all of the manuals on how to install them. I'm just concerned that these antenna have 3 white cables hanging off each one that connect to the AP3865E and am worried about them flapping around in the wind and how unsightly the cables will look. They are going to be installed on the edge of a school building on brick walls. Each AP3865E needs 2x WS-AODT05120N and am after pictures and details of deployements of these type of antennas to see how other people have installed them and kept them looking neat and tidy.

RE: AP3865E Antenna WS-AODT05120N installation

Doug — Thu, 14 May 2015 23:25:00 GMT

A suggestion from our Stadium Director....

We typically coil and dress these accordingly with zip ties. They can be affixed to the mounting bracket or mounting surface depending upon the construction.

Many of our venues place the AP inside an enclosure for aesthetics purposes. This also serves as a good location for coiled cables.

-jburke

RE: AP3865E Antenna WS-AODT05120N installation

Roaming_24_7 — Wed, 24 Jun 2015 21:26:00 GMT

Here is a picture of one outdoor setup. Not exactly what you are using but very similar.

And Here is a far view...