https://community.extremenetworks.com/t5/extremewireless-identifi/access-point-grouping/m-p/55150#M6412 I have 25 buildings in my school district and a total of 556 AP's throughout. They are a mixture of 2610;s, 3610's and 3805's. The 2610's are being controlled by a pair of 4210's running 8.11.09.004 firmware and the others are on 5210 controllers running 9.21.07.0007 firmware. I would like to group the AP's according to the building locations in order to do a Bandwidth by AP group report. Is this possible? Thu, 17 Mar 2016 22:49:00 GMT Thomas_Maddox 2016-03-17T22:49:00Z https://community.extremenetworks.com/t5/extremewireless-identifi/access-point-grouping/m-p/55150#M6412 I have 25 buildings in my school district and a total of 556 AP's throughout. They are a mixture of 2610;s, 3610's and 3805's. The 2610's are being controlled by a pair of 4210's running 8.11.09.004 firmware and the others are on 5210 controllers running 9.21.07.0007 firmware. I would like to group the AP's according to the building locations in order to do a Bandwidth by AP group report. Is this possible? Thu, 17 Mar 2016 22:49:00 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/access-point-grouping/m-p/55150#M6412 Thomas_Maddox 2016-03-17T22:49:00Z https://community.extremenetworks.com/t5/extremewireless-identifi/access-point-grouping/m-p/55151#M6413 Hi,<BR /> <BR /> AFAIK you can do it with our management platform = NMS = NetSight = ControlCenter (just choose the name you wish to use).<BR /> <BR /> You can start Console and then Wireless Manager. you need SNMP and CLI(SSH) access to the controller.<BR /> <BR /> good luck<BR /> <BR /> Zdenek Fri, 18 Mar 2016 12:23:00 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/access-point-grouping/m-p/55151#M6413 Zdeněk_Pala 2016-03-18T12:23:00Z