topic RE: Configure cli Identifi C35 in ExtremeWireless (Identifi)

Configure cli Identifi C35

agd — Wed, 02 Sep 2015 22:02:00 GMT

Hi,

I made config changes within the cli (SSH) on a Identifi C35 but looks like it doesn't takes.
Is there any command to "approve"/save the commands ?

Thanks.
BT

RE: Configure cli Identifi C35

Doug — Wed, 02 Sep 2015 22:04:00 GMT

apply = save config

RE: Configure cli Identifi C35

agd — Wed, 02 Sep 2015 22:10:00 GMT

At the CLI, I have no "apply" command.

RE: Configure cli Identifi C35

Doug — Wed, 02 Sep 2015 22:15:00 GMT

It would depend on the section you are in...

Example:

EWC.extremenetworks.com:topology# ?
Available commands are:
Admin Configure details for topology Admin
Bridged at AP untagged Configure details for topology Bridged at AP untagged
Physical 1 Configure details for topology Physical 1
apply Apply the command setting
create Create topology
delete Delete topology
end Return to the base mode
exit Return to the previous mode
internal-vlanid Set controller internal vlan management
logout Logout
multicast-support Set controller multicast support management
show Display settings
topology-group Configure Controller topology group settings
EWC.extremenetworks.com:topology#

RE: Configure cli Identifi C35

agd — Wed, 02 Sep 2015 22:58:00 GMT

Thanks !

RE: Configure cli Identifi C35

Doug — Wed, 02 Sep 2015 23:03:00 GMT

No problem, glad to help.