topic Re: How to access AP3935i-fcc in ExtremeWireless (Identifi)

How to access AP3935i-fcc

Rob21 — Tue, 19 Jan 2021 23:52:37 GMT

Hi,

I have the AP3935i-fcc but I don't have anything to help me having access and configure that for internal using without cloud analytics, just like autonomous mode.

What should I do?

Thanks in advanced

Re: How to access AP3935i-fcc

Tomasz — Wed, 20 Jan 2021 00:03:47 GMT

Hi Rob,

As far as I remember IdentiFi/XCA/XCC APs (37xx, 38xx, 39xx) are incapable of standalone mode. In theory you could try to SSH (admin:new2day) and play with cset commands but it’s not a convenient task. Your AP may also reboot after a while (probably 255 seconds) if it fails to discover the controller.

Hope that helps,

Tomasz

Re: How to access AP3935i-fcc

StephanH — Wed, 20 Jan 2021 00:16:24 GMT

Hello Rob,

Tomasz is completely right. The AP3935 does not work without a controller and there is no standalone mode. You can configure the AP on a controller and then operate it without it (this corresponds to the controller failure case), but this is no fun.

Re: How to access AP3935i-fcc

Ronald_Dvorak — Wed, 20 Jan 2021 01:36:49 GMT

Hi Rob,

here a link how you’d config it - controller required….

https://extremeportal.force.com/ExtrArticleDetail?an=000074210

-Ron

Re: How to access AP3935i-fcc

Rob21 — Mon, 25 Jan 2021 22:24:47 GMT

Thank you Guys, for your feedback.