https://community.extremenetworks.com/t5/extremewireless-identifi/single-ap-with-2-ssid-one-works-the-other-doesn-t/m-p/76007#M6951 Hello all, so I have an Extreme C5210 controller with MULTIPLE ap's. For some reason <B>3</B> ap's seem to be acting weird.<BR /> <BR /> I have 2 SSID's running off them. Let's says...<B>ABC</B> (g/n) and <B>XYZ</B> (a/n/ac)<BR /> <BR /> I can connect to ABC just fine, but for some reason I get Limited connectivity with XYZ. I'm not sure why as these signals work just fine through my other ap's.<BR /> I did a reboot but that didn't work. Settings appear to be the same across the board for all AP's. I used Inssider and have good signal strength for both ABC and XYZ. Plenty of space in DHCP.<BR /> <BR /> Do you guys have any ideas on what else I should try? I'm at a bit of a loss. Tue, 30 Apr 2019 01:48:42 GMT David_Cotos 2019-04-30T01:48:42Z https://community.extremenetworks.com/t5/extremewireless-identifi/single-ap-with-2-ssid-one-works-the-other-doesn-t/m-p/76007#M6951 Hello all, so I have an Extreme C5210 controller with MULTIPLE ap's. For some reason <B>3</B> ap's seem to be acting weird.<BR /> <BR /> I have 2 SSID's running off them. Let's says...<B>ABC</B> (g/n) and <B>XYZ</B> (a/n/ac)<BR /> <BR /> I can connect to ABC just fine, but for some reason I get Limited connectivity with XYZ. I'm not sure why as these signals work just fine through my other ap's.<BR /> I did a reboot but that didn't work. Settings appear to be the same across the board for all AP's. I used Inssider and have good signal strength for both ABC and XYZ. Plenty of space in DHCP.<BR /> <BR /> Do you guys have any ideas on what else I should try? I'm at a bit of a loss. Tue, 30 Apr 2019 01:48:42 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/single-ap-with-2-ssid-one-works-the-other-doesn-t/m-p/76007#M6951 David_Cotos 2019-04-30T01:48:42Z https://community.extremenetworks.com/t5/extremewireless-identifi/single-ap-with-2-ssid-one-works-the-other-doesn-t/m-p/76008#M6952 Could it be VLAN tagging on the ports those APs are connected to. I know my different SSIDs all run on different VLANs. Tue, 30 Apr 2019 01:58:58 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/single-ap-with-2-ssid-one-works-the-other-doesn-t/m-p/76008#M6952 dcsdne 2019-04-30T01:58:58Z https://community.extremenetworks.com/t5/extremewireless-identifi/single-ap-with-2-ssid-one-works-the-other-doesn-t/m-p/76009#M6953 Ahh, you nailed it! Thanks!! Tue, 30 Apr 2019 02:54:22 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/single-ap-with-2-ssid-one-works-the-other-doesn-t/m-p/76009#M6953 David_Cotos 2019-04-30T02:54:22Z