https://community.extremenetworks.com/t5/extremewireless-identifi/quick-question-regarding-the-ap3935i-model/m-p/83265#M7146 Hi everyone, coming from the Cisco world, I've been thrust into the Extreme world due to my new assignment and I'm freaking loving this. I have a quick question regarding the above mentioned AP. To get max throughput, do I need to have both lan ports connected via Cat6? Fri, 15 Mar 2019 19:09:01 GMT Rus 2019-03-15T19:09:01Z https://community.extremenetworks.com/t5/extremewireless-identifi/quick-question-regarding-the-ap3935i-model/m-p/83265#M7146 Hi everyone, coming from the Cisco world, I've been thrust into the Extreme world due to my new assignment and I'm freaking loving this. I have a quick question regarding the above mentioned AP. To get max throughput, do I need to have both lan ports connected via Cat6? Fri, 15 Mar 2019 19:09:01 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/quick-question-regarding-the-ap3935i-model/m-p/83265#M7146 Rus 2019-03-15T19:09:01Z https://community.extremenetworks.com/t5/extremewireless-identifi/quick-question-regarding-the-ap3935i-model/m-p/83266#M7147 Hi Rus<BR /> <BR /> You don't need both ports connecting to bring the AP up, 1 802.1at port is fine (af power works but only with the radio at 2x2)<BR /> <BR /> If you use both links, you need to do LACP lag with the switch, traffic is distributed across the lag as defined here: https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-hashing-algorithm-used-to-distribute-load-across-links-on-access-points-with-dual-Ethernet-ports-running-LACP/<BR /> <BR /> -Gareth Fri, 15 Mar 2019 20:08:30 GMT https://community.extremenetworks.com/t5/extremewireless-identifi/quick-question-regarding-the-ap3935i-model/m-p/83266#M7147 Gareth_Mitchell 2019-03-15T20:08:30Z