topic Re: Help to set up. in ExtremeWireless (Identifi)

Help to set up.

thiagopires — Fri, 02 Aug 2019 05:27:01 GMT

Guys, sorry my english, I'm brazilian and I'm using google translator, I bought this Enterasys and I can not configure it, I put it on power and use a cable straight on the notebook, open cmd and type ipconfig and can not see the geteway default to access the device and try to configure, already reset it and still does not work, can anyone help me?

Re: Help to set up.

ckelly — Fri, 02 Aug 2019 20:35:00 GMT

You will have better chance of getting a response if you post this message in the (Identifi) section.

Re: Help to set up.

Drew_C — Fri, 02 Aug 2019 22:26:38 GMT

I've moved it.

Re: Help to set up.

Seth_Bean — Fri, 02 Aug 2019 22:32:18 GMT

These need a controller; you can access the CLI on these with SSH. Type ? to get a list of commands. But you will need a controller to get them to work properly. If you are looking to connect to them on a closed network, you are better off getting a small workgroup switch and running a DHCP server from your laptop (I've used dhcpd myself with success). Once the AP is connected to the switch and gets an address, you can SSH to that and make adjustments.

Re: Help to set up.

Scott_Whall — Fri, 02 Aug 2019 22:33:48 GMT

This Access Point requires a Wireless appliance/controller. It is not a standalone device. I would recommend you reach out to a local EXTR team member to get more information on the product lines we have, and training materials you can use to understand this better.