topic RE: Where can I find DHCP lease information on IdentiFi v10.11? in ExtremeWireless (Identifi)

Where can I find DHCP lease information on IdentiFi v10.11?

Dean_Ferraro — Mon, 03 Oct 2016 20:45:00 GMT

With dhcp enabled on identifi V2110 controller running 10.11 code, where do i see the details of lease info?

RE: Where can I find DHCP lease information on IdentiFi v10.11?

Karthik_Mohando — Tue, 04 Oct 2016 12:04:00 GMT

Dean,

VNS >> Topologies >>
click on the created topology and look for DHCP:Localserver and you can see the lease time by clicking the "configure" button.

RE: Where can I find DHCP lease information on IdentiFi v10.11?

ATK_Suomenlinna — Fri, 21 Oct 2016 18:56:00 GMT

how to clear leases in identifi (9.21.6 in my case)? ran out of leases, reduced lease time, but the now obsolete leases are not automatically cleared.

RE: Where can I find DHCP lease information on IdentiFi v10.11?

Ronald_Dvorak — Mon, 24 Oct 2016 20:13:00 GMT

You can't clear the leases via the GUI.

But you'd set the topology to "use relay" and any IP and save - then set it back to "local DHCP" - that should reset/clear the lease file.

RE: Where can I find DHCP lease information on IdentiFi v10.11?

Dean_Ferraro — Mon, 24 Oct 2016 21:08:00 GMT

Very good Thanks Ron

RE: Where can I find DHCP lease information on IdentiFi v10.11?

ATK_Suomenlinna — Tue, 25 Oct 2016 10:54:00 GMT

Thanks. Later found this also https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-delete-the-DHCP-lease-file-on-the-IdentFi-Wireless-Controllers basically it is possible to go to the shell level and edit the leases file. I would add to the How To that the default writing cycle of the dhcp daemon to this lease file is 5 minutes, and it is best to start editing after the next write is done so one gets full 5 minutes editing time.