<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic Captive Portal page can not redirection in ExtremeWireless (WiNG)</title>
    <link>https://community.extremenetworks.com/t5/extremewireless-wing/captive-portal-page-can-not-redirection/m-p/121619#M10010</link>
    <description>&lt;P&gt;I want to set up the captive portal on the guest ssid I set up on the wireless controller in the test environment. I finished setting up the guest ssid. However, when I connected the guest ssid, the captive portal page is not redirection.&lt;/P&gt;&lt;P&gt;&lt;BR /&gt;I'd like to configure a basic captive portal service, is there anything I missed in the configration?&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;nx5500-86C498#show running-config&lt;BR /&gt;!&lt;BR /&gt;! Configuration of NX5500 version 7.9.6.1-003R&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;version 2.7&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;client-identity-group default&lt;BR /&gt;load default-fingerprints&lt;BR /&gt;!&lt;BR /&gt;ip access-list BROADCAST-MULTICAST-CONTROL&lt;BR /&gt;permit tcp any any rule-precedence 10 rule-description "permit all TCP traffic"&lt;BR /&gt;permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit DHCP replies"&lt;BR /&gt;deny udp any range 137 138 any range 137 138 rule-precedence 20 rule-description "deny windows netbios"&lt;BR /&gt;deny ip any 224.0.0.0/4 rule-precedence 21 rule-description "deny IP multicast"&lt;BR /&gt;deny ip any host 255.255.255.255 rule-precedence 22 rule-description "deny IP local broadcast"&lt;BR /&gt;permit ip any any rule-precedence 100 rule-description "permit all IP traffic"&lt;BR /&gt;!&lt;BR /&gt;mac access-list PERMIT-ARP-AND-IPv4&lt;BR /&gt;permit any any type ip rule-precedence 10 rule-description "permit all IPv4 traffic"&lt;BR /&gt;permit any any type arp rule-precedence 20 rule-description "permit all ARP traffic"&lt;BR /&gt;!&lt;BR /&gt;ip snmp-access-list default&lt;BR /&gt;permit any&lt;BR /&gt;!&lt;BR /&gt;firewall-policy default&lt;BR /&gt;no ip dos tcp-sequence-past-window&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;mint-policy global-default&lt;BR /&gt;!&lt;BR /&gt;meshpoint-qos-policy default&lt;BR /&gt;!&lt;BR /&gt;wlan-qos-policy default&lt;BR /&gt;qos trust dscp&lt;BR /&gt;qos trust wmm&lt;BR /&gt;!&lt;BR /&gt;radio-qos-policy default&lt;BR /&gt;!&lt;BR /&gt;&lt;FONT color="#FF0000"&gt;captive-portal captiveportal-test&lt;/FONT&gt;&lt;BR /&gt;access-type no-auth&lt;BR /&gt;server host guest.access.net&lt;BR /&gt;server mode centralized&lt;BR /&gt;webpage internal login main-logo use-as-banner&lt;BR /&gt;webpage-auto-upload&lt;BR /&gt;redirection ports 80&lt;BR /&gt;webpage internal registration field city type text enable label "City" placeholder "Enter City"&lt;BR /&gt;webpage internal registration field street type text enable label "Address" placeholder "123 Any Street"&lt;BR /&gt;webpage internal registration field name type text enable label "Full Name" placeholder "Enter First Name, Last Name"&lt;BR /&gt;webpage internal registration field zip type number enable label "Zip" placeholder "Zip"&lt;BR /&gt;webpage internal registration field via-sms type checkbox enable title "SMS Preferred"&lt;BR /&gt;webpage internal registration field mobile type number enable label "Mobile" placeholder "Mobile Number with Country code"&lt;BR /&gt;webpage internal registration field age-range type dropdown-menu enable label "Age Range" title "Age Range"&lt;BR /&gt;webpage internal registration field email type e-address enable mandatory label "Email" placeholder "you@domain.com"&lt;BR /&gt;webpage internal registration field via-email type checkbox enable title "Email Preferred"&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-MD-24G&lt;BR /&gt;ssid Harim-Holdings-MD-2.4G&lt;BR /&gt;vlan 220&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-MD-5G&lt;BR /&gt;ssid Harim-Holdings-MD-5G&lt;BR /&gt;vlan 220&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-MD-Guest&lt;BR /&gt;ssid Harim-Holdings-MD-Guest&lt;BR /&gt;vlan 980&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;&lt;FONT color="#FF0000"&gt;use captive-portal captiveportal-test&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT color="#FF0000"&gt;captive-portal-enforcement&lt;/FONT&gt;&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-PG-24G&lt;BR /&gt;ssid Harim-Holdings-PG-2.4G&lt;BR /&gt;vlan 4&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-PG-5G&lt;BR /&gt;ssid Harim-Holdings-PG-5G&lt;BR /&gt;vlan 4&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-PG-Guest&lt;BR /&gt;ssid Harim-Holdings-PG-Guest&lt;BR /&gt;vlan 1980&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-SS-24G&lt;BR /&gt;ssid Harim-Holdings-SS-2.4G&lt;BR /&gt;vlan 2200&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-SS-5G&lt;BR /&gt;ssid Harim-Holdings-SS-5G&lt;BR /&gt;vlan 2200&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-SS-Guest&lt;BR /&gt;ssid Harim-Holdings-SS-Guest&lt;BR /&gt;vlan 2530&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;management-policy default&lt;BR /&gt;no telnet&lt;BR /&gt;no http server&lt;BR /&gt;nova&lt;BR /&gt;flash-ui&lt;BR /&gt;https server&lt;BR /&gt;rest-server&lt;BR /&gt;ssh&lt;BR /&gt;ssh enable-weak-mac-algo 1&lt;BR /&gt;user admin password 1 0aa700fedf5e576d8bb29d9d6a21d5d926ec199e5db4175bb3b7074d2d534dc5 role superuser access all&lt;BR /&gt;snmp-server community 0 private rw&lt;BR /&gt;snmp-server community 0 public ro&lt;BR /&gt;snmp-server user snmptrap v3 encrypted des auth md5 0 admin123&lt;BR /&gt;snmp-server user snmpmanager v3 encrypted des auth md5 0 admin123&lt;BR /&gt;!&lt;BR /&gt;ex3500-management-policy default&lt;BR /&gt;snmp-server community public ro&lt;BR /&gt;snmp-server community private rw&lt;BR /&gt;snmp-server notify-filter 1 remote 127.0.0.1&lt;BR /&gt;snmp-server view defaultview 1 included&lt;BR /&gt;!&lt;BR /&gt;ex3500-qos-class-map-policy default&lt;BR /&gt;!&lt;BR /&gt;ex3500-qos-policy-map default&lt;BR /&gt;!&lt;BR /&gt;profile nx5500 default-nx5500&lt;BR /&gt;no autoinstall configuration&lt;BR /&gt;no autoinstall firmware&lt;BR /&gt;no device-upgrade auto&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface ge3&lt;BR /&gt;interface ge4&lt;BR /&gt;interface ge5&lt;BR /&gt;interface ge6&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;router bgp&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile rfs4000 default-rfs4000&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface up1&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface ge3&lt;BR /&gt;interface ge4&lt;BR /&gt;interface ge5&lt;BR /&gt;interface wwan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;logging on&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;router bgp&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410c Harim-Holdings-MD-AP410c&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;wlan Harim-Holdings-MD-24G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-MD-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio2&lt;BR /&gt;wlan Harim-Holdings-MD-5G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-MD-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio3&lt;BR /&gt;shutdown&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;switchport mode trunk&lt;BR /&gt;switchport trunk allowed vlan 1,220,980&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;&lt;FONT color="#FF0000"&gt;use captive-portal server captiveportal-test&lt;/FONT&gt;&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410 Harim-Holdings-MD-AP410i&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;wlan Harim-Holdings-MD-24G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-MD-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio2&lt;BR /&gt;wlan Harim-Holdings-MD-5G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-MD-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio3&lt;BR /&gt;shutdown&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;switchport mode trunk&lt;BR /&gt;switchport trunk allowed vlan 1,220,980&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410c Harim-Holdings-PG-AP410c&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;wlan Harim-Holdings-PG-24G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-PG-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio2&lt;BR /&gt;wlan Harim-Holdings-PG-5G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-PG-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio3&lt;BR /&gt;shutdown&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;switchport mode trunk&lt;BR /&gt;switchport trunk allowed vlan 1,4,1980&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410 Harim-Holdings-PG-AP410i&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;wlan Harim-Holdings-PG-24G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-PG-Guest bss 2 primary&lt;BR /&gt;interface radio2&lt;BR /&gt;wlan Harim-Holdings-PG-5G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-PG-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio3&lt;BR /&gt;shutdown&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;switchport mode trunk&lt;BR /&gt;switchport trunk allowed vlan 1,4,1980&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410c Harim-Holdings-SS-AP410c&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;wlan Harim-Holdings-SS-24G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-SS-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio2&lt;BR /&gt;wlan Harim-Holdings-SS-5G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-SS-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio3&lt;BR /&gt;shutdown&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;switchport mode trunk&lt;BR /&gt;switchport trunk allowed vlan 1,2200,2530&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410 Harim-Holdings-SS-AP410i&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;wlan Harim-Holdings-SS-24G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-SS-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio2&lt;BR /&gt;wlan Harim-Holdings-SS-5G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-SS-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio3&lt;BR /&gt;shutdown&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;switchport mode trunk&lt;BR /&gt;switchport trunk allowed vlan 1,2200,2530&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410 default-ap410&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface radio3&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410c default-ap410c&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface radio3&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap82xx default-ap82xx&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface radio3&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface wwan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap81xx default-ap81xx&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface radio3&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode bt-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface wwan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap7522 default-ap7522&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;transmit-beamforming&lt;BR /&gt;interface radio2&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;enforce-version adoption none&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap7532 default-ap7532&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;enforce-version adoption none&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap7562 default-ap7562&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;placement outdoor&lt;BR /&gt;interface radio2&lt;BR /&gt;placement outdoor&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap7502 default-ap7502&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface ge1&lt;BR /&gt;interface fe1&lt;BR /&gt;interface fe2&lt;BR /&gt;interface fe3&lt;BR /&gt;no power&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap71xx default-ap71xx&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface radio3&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface wwan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap6532 default-ap6532&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap650 default-ap650&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap6521 default-ap6521&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;interface radio1&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap621 default-ap621&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;interface radio1&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap6511 default-ap6511&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;interface radio1&lt;BR /&gt;interface up1&lt;BR /&gt;interface fe1&lt;BR /&gt;interface fe2&lt;BR /&gt;interface fe3&lt;BR /&gt;interface fe4&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap6562 default-ap6562&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;placement outdoor&lt;BR /&gt;interface radio2&lt;BR /&gt;placement outdoor&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap6522 default-ap6522&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap622 default-ap622&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;rf-domain HH-Madong&lt;BR /&gt;location HH-madong&lt;BR /&gt;timezone Asia/Seoul&lt;BR /&gt;country-code kr&lt;BR /&gt;ad-wips-wireless-mitigation disable&lt;BR /&gt;ad-wips-wired-mitigation disable&lt;BR /&gt;!&lt;BR /&gt;rf-domain HH-Pangyo&lt;BR /&gt;location HH-pangyo&lt;BR /&gt;timezone Asia/Seoul&lt;BR /&gt;country-code kr&lt;BR /&gt;ad-wips-wireless-mitigation disable&lt;BR /&gt;ad-wips-wired-mitigation disable&lt;BR /&gt;!&lt;BR /&gt;rf-domain HH-Sinsa&lt;BR /&gt;location HH-sinsa&lt;BR /&gt;timezone Asia/Seoul&lt;BR /&gt;country-code kr&lt;BR /&gt;ad-wips-wireless-mitigation disable&lt;BR /&gt;ad-wips-wired-mitigation disable&lt;BR /&gt;!&lt;BR /&gt;rf-domain default&lt;BR /&gt;no country-code&lt;BR /&gt;ad-wips-wireless-mitigation disable&lt;BR /&gt;ad-wips-wired-mitigation disable&lt;BR /&gt;!&lt;BR /&gt;nx5500 40-83-DE-86-C4-98&lt;BR /&gt;use profile default-nx5500&lt;BR /&gt;use rf-domain default&lt;BR /&gt;hostname nx5500-86C498&lt;BR /&gt;license AAP e1b0e7a6e59eb47dc42786f441bfe47150fafc9b847a1c19130732ce9c14e1cb21ded0e5d20f77bb&lt;BR /&gt;license ADSEC DEFAULT-ADV-SEC-LICENSE&lt;BR /&gt;ip default-gateway 172.26.13.1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address 172.26.13.10/24&lt;BR /&gt;interface vlan980&lt;BR /&gt;logging on&lt;BR /&gt;logging console warnings&lt;BR /&gt;logging buffered warnings&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;ap410c 18-49-F8-18-51-80&lt;BR /&gt;use profile Harim-Holdings-MD-AP410c&lt;BR /&gt;use rf-domain HH-Madong&lt;BR /&gt;hostname HH-MD-1F-AP-1&lt;BR /&gt;ip default-gateway 172.26.12.1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address 172.26.12.10/24&lt;BR /&gt;&lt;FONT color="#FF0000"&gt;use captive-portal server captiveportal-test&lt;/FONT&gt;&lt;BR /&gt;controller host 172.26.13.10&lt;BR /&gt;!&lt;BR /&gt;ap410 24-1F-BD-DB-53-0C&lt;BR /&gt;use profile Harim-Holdings-SS-AP410i&lt;BR /&gt;use rf-domain HH-Sinsa&lt;BR /&gt;hostname HH-SS-1F-AP-1&lt;BR /&gt;ip default-gateway 172.26.202.1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address 172.26.202.10/24&lt;BR /&gt;controller host 172.26.13.10&lt;BR /&gt;!&lt;BR /&gt;ap410 24-1F-BD-DB-53-8A&lt;BR /&gt;use profile Harim-Holdings-PG-AP410i&lt;BR /&gt;use rf-domain HH-Pangyo&lt;BR /&gt;hostname HH-PG-1F-AP-1&lt;BR /&gt;ip default-gateway 172.26.102.1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address 172.26.102.10/24&lt;BR /&gt;controller host 172.26.13.10&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;end&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
    <pubDate>Wed, 22 Apr 2026 08:43:53 GMT</pubDate>
    <dc:creator>orcl2020</dc:creator>
    <dc:date>2026-04-22T08:43:53Z</dc:date>
    <item>
      <title>Captive Portal page can not redirection</title>
      <link>https://community.extremenetworks.com/t5/extremewireless-wing/captive-portal-page-can-not-redirection/m-p/121619#M10010</link>
      <description>&lt;P&gt;I want to set up the captive portal on the guest ssid I set up on the wireless controller in the test environment. I finished setting up the guest ssid. However, when I connected the guest ssid, the captive portal page is not redirection.&lt;/P&gt;&lt;P&gt;&lt;BR /&gt;I'd like to configure a basic captive portal service, is there anything I missed in the configration?&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;&lt;P&gt;nx5500-86C498#show running-config&lt;BR /&gt;!&lt;BR /&gt;! Configuration of NX5500 version 7.9.6.1-003R&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;version 2.7&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;client-identity-group default&lt;BR /&gt;load default-fingerprints&lt;BR /&gt;!&lt;BR /&gt;ip access-list BROADCAST-MULTICAST-CONTROL&lt;BR /&gt;permit tcp any any rule-precedence 10 rule-description "permit all TCP traffic"&lt;BR /&gt;permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit DHCP replies"&lt;BR /&gt;deny udp any range 137 138 any range 137 138 rule-precedence 20 rule-description "deny windows netbios"&lt;BR /&gt;deny ip any 224.0.0.0/4 rule-precedence 21 rule-description "deny IP multicast"&lt;BR /&gt;deny ip any host 255.255.255.255 rule-precedence 22 rule-description "deny IP local broadcast"&lt;BR /&gt;permit ip any any rule-precedence 100 rule-description "permit all IP traffic"&lt;BR /&gt;!&lt;BR /&gt;mac access-list PERMIT-ARP-AND-IPv4&lt;BR /&gt;permit any any type ip rule-precedence 10 rule-description "permit all IPv4 traffic"&lt;BR /&gt;permit any any type arp rule-precedence 20 rule-description "permit all ARP traffic"&lt;BR /&gt;!&lt;BR /&gt;ip snmp-access-list default&lt;BR /&gt;permit any&lt;BR /&gt;!&lt;BR /&gt;firewall-policy default&lt;BR /&gt;no ip dos tcp-sequence-past-window&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;mint-policy global-default&lt;BR /&gt;!&lt;BR /&gt;meshpoint-qos-policy default&lt;BR /&gt;!&lt;BR /&gt;wlan-qos-policy default&lt;BR /&gt;qos trust dscp&lt;BR /&gt;qos trust wmm&lt;BR /&gt;!&lt;BR /&gt;radio-qos-policy default&lt;BR /&gt;!&lt;BR /&gt;&lt;FONT color="#FF0000"&gt;captive-portal captiveportal-test&lt;/FONT&gt;&lt;BR /&gt;access-type no-auth&lt;BR /&gt;server host guest.access.net&lt;BR /&gt;server mode centralized&lt;BR /&gt;webpage internal login main-logo use-as-banner&lt;BR /&gt;webpage-auto-upload&lt;BR /&gt;redirection ports 80&lt;BR /&gt;webpage internal registration field city type text enable label "City" placeholder "Enter City"&lt;BR /&gt;webpage internal registration field street type text enable label "Address" placeholder "123 Any Street"&lt;BR /&gt;webpage internal registration field name type text enable label "Full Name" placeholder "Enter First Name, Last Name"&lt;BR /&gt;webpage internal registration field zip type number enable label "Zip" placeholder "Zip"&lt;BR /&gt;webpage internal registration field via-sms type checkbox enable title "SMS Preferred"&lt;BR /&gt;webpage internal registration field mobile type number enable label "Mobile" placeholder "Mobile Number with Country code"&lt;BR /&gt;webpage internal registration field age-range type dropdown-menu enable label "Age Range" title "Age Range"&lt;BR /&gt;webpage internal registration field email type e-address enable mandatory label "Email" placeholder "you@domain.com"&lt;BR /&gt;webpage internal registration field via-email type checkbox enable title "Email Preferred"&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-MD-24G&lt;BR /&gt;ssid Harim-Holdings-MD-2.4G&lt;BR /&gt;vlan 220&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-MD-5G&lt;BR /&gt;ssid Harim-Holdings-MD-5G&lt;BR /&gt;vlan 220&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-MD-Guest&lt;BR /&gt;ssid Harim-Holdings-MD-Guest&lt;BR /&gt;vlan 980&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;&lt;FONT color="#FF0000"&gt;use captive-portal captiveportal-test&lt;/FONT&gt;&lt;BR /&gt;&lt;FONT color="#FF0000"&gt;captive-portal-enforcement&lt;/FONT&gt;&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-PG-24G&lt;BR /&gt;ssid Harim-Holdings-PG-2.4G&lt;BR /&gt;vlan 4&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-PG-5G&lt;BR /&gt;ssid Harim-Holdings-PG-5G&lt;BR /&gt;vlan 4&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-PG-Guest&lt;BR /&gt;ssid Harim-Holdings-PG-Guest&lt;BR /&gt;vlan 1980&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-SS-24G&lt;BR /&gt;ssid Harim-Holdings-SS-2.4G&lt;BR /&gt;vlan 2200&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-SS-5G&lt;BR /&gt;ssid Harim-Holdings-SS-5G&lt;BR /&gt;vlan 2200&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;wlan Harim-Holdings-SS-Guest&lt;BR /&gt;ssid Harim-Holdings-SS-Guest&lt;BR /&gt;vlan 2530&lt;BR /&gt;bridging-mode local&lt;BR /&gt;encryption-type none&lt;BR /&gt;authentication-type none&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;management-policy default&lt;BR /&gt;no telnet&lt;BR /&gt;no http server&lt;BR /&gt;nova&lt;BR /&gt;flash-ui&lt;BR /&gt;https server&lt;BR /&gt;rest-server&lt;BR /&gt;ssh&lt;BR /&gt;ssh enable-weak-mac-algo 1&lt;BR /&gt;user admin password 1 0aa700fedf5e576d8bb29d9d6a21d5d926ec199e5db4175bb3b7074d2d534dc5 role superuser access all&lt;BR /&gt;snmp-server community 0 private rw&lt;BR /&gt;snmp-server community 0 public ro&lt;BR /&gt;snmp-server user snmptrap v3 encrypted des auth md5 0 admin123&lt;BR /&gt;snmp-server user snmpmanager v3 encrypted des auth md5 0 admin123&lt;BR /&gt;!&lt;BR /&gt;ex3500-management-policy default&lt;BR /&gt;snmp-server community public ro&lt;BR /&gt;snmp-server community private rw&lt;BR /&gt;snmp-server notify-filter 1 remote 127.0.0.1&lt;BR /&gt;snmp-server view defaultview 1 included&lt;BR /&gt;!&lt;BR /&gt;ex3500-qos-class-map-policy default&lt;BR /&gt;!&lt;BR /&gt;ex3500-qos-policy-map default&lt;BR /&gt;!&lt;BR /&gt;profile nx5500 default-nx5500&lt;BR /&gt;no autoinstall configuration&lt;BR /&gt;no autoinstall firmware&lt;BR /&gt;no device-upgrade auto&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface ge3&lt;BR /&gt;interface ge4&lt;BR /&gt;interface ge5&lt;BR /&gt;interface ge6&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;router bgp&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile rfs4000 default-rfs4000&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface up1&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface ge3&lt;BR /&gt;interface ge4&lt;BR /&gt;interface ge5&lt;BR /&gt;interface wwan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;logging on&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;router bgp&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410c Harim-Holdings-MD-AP410c&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;wlan Harim-Holdings-MD-24G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-MD-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio2&lt;BR /&gt;wlan Harim-Holdings-MD-5G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-MD-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio3&lt;BR /&gt;shutdown&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;switchport mode trunk&lt;BR /&gt;switchport trunk allowed vlan 1,220,980&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;&lt;FONT color="#FF0000"&gt;use captive-portal server captiveportal-test&lt;/FONT&gt;&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410 Harim-Holdings-MD-AP410i&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;wlan Harim-Holdings-MD-24G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-MD-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio2&lt;BR /&gt;wlan Harim-Holdings-MD-5G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-MD-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio3&lt;BR /&gt;shutdown&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;switchport mode trunk&lt;BR /&gt;switchport trunk allowed vlan 1,220,980&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410c Harim-Holdings-PG-AP410c&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;wlan Harim-Holdings-PG-24G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-PG-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio2&lt;BR /&gt;wlan Harim-Holdings-PG-5G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-PG-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio3&lt;BR /&gt;shutdown&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;switchport mode trunk&lt;BR /&gt;switchport trunk allowed vlan 1,4,1980&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410 Harim-Holdings-PG-AP410i&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;wlan Harim-Holdings-PG-24G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-PG-Guest bss 2 primary&lt;BR /&gt;interface radio2&lt;BR /&gt;wlan Harim-Holdings-PG-5G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-PG-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio3&lt;BR /&gt;shutdown&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;switchport mode trunk&lt;BR /&gt;switchport trunk allowed vlan 1,4,1980&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410c Harim-Holdings-SS-AP410c&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;wlan Harim-Holdings-SS-24G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-SS-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio2&lt;BR /&gt;wlan Harim-Holdings-SS-5G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-SS-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio3&lt;BR /&gt;shutdown&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;switchport mode trunk&lt;BR /&gt;switchport trunk allowed vlan 1,2200,2530&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410 Harim-Holdings-SS-AP410i&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;wlan Harim-Holdings-SS-24G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-SS-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio2&lt;BR /&gt;wlan Harim-Holdings-SS-5G bss 1 primary&lt;BR /&gt;wlan Harim-Holdings-SS-Guest bss 2 primary&lt;BR /&gt;mu-mimo&lt;BR /&gt;interface radio3&lt;BR /&gt;shutdown&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;switchport mode trunk&lt;BR /&gt;switchport trunk allowed vlan 1,2200,2530&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410 default-ap410&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface radio3&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap410c default-ap410c&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface radio3&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode le-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface pppoe1&lt;BR /&gt;interface usb0&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap82xx default-ap82xx&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface radio3&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface wwan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap81xx default-ap81xx&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface radio3&lt;BR /&gt;interface bluetooth1&lt;BR /&gt;shutdown&lt;BR /&gt;mode bt-sensor&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface wwan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap7522 default-ap7522&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;transmit-beamforming&lt;BR /&gt;interface radio2&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;enforce-version adoption none&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap7532 default-ap7532&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;enforce-version adoption none&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap7562 default-ap7562&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;placement outdoor&lt;BR /&gt;interface radio2&lt;BR /&gt;placement outdoor&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;router ospf&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap7502 default-ap7502&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface ge1&lt;BR /&gt;interface fe1&lt;BR /&gt;interface fe2&lt;BR /&gt;interface fe3&lt;BR /&gt;no power&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap71xx default-ap71xx&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface radio3&lt;BR /&gt;interface ge1&lt;BR /&gt;interface ge2&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface wwan1&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap6532 default-ap6532&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap650 default-ap650&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap6521 default-ap6521&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;interface radio1&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap621 default-ap621&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;interface radio1&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap6511 default-ap6511&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;interface radio1&lt;BR /&gt;interface up1&lt;BR /&gt;interface fe1&lt;BR /&gt;interface fe2&lt;BR /&gt;interface fe3&lt;BR /&gt;interface fe4&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap6562 default-ap6562&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;placement outdoor&lt;BR /&gt;interface radio2&lt;BR /&gt;placement outdoor&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap6522 default-ap6522&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;interface pppoe1&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;profile ap622 default-ap622&lt;BR /&gt;autoinstall configuration&lt;BR /&gt;autoinstall firmware&lt;BR /&gt;crypto ikev1 policy ikev1-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ikev2 policy ikev2-default&lt;BR /&gt;isakmp-proposal default encryption aes-256 group 2 hash sha&lt;BR /&gt;crypto ipsec transform-set default esp-aes-256 esp-sha-hmac&lt;BR /&gt;crypto ikev1 remote-vpn&lt;BR /&gt;crypto ikev2 remote-vpn&lt;BR /&gt;crypto auto-ipsec-secure&lt;BR /&gt;crypto load-management&lt;BR /&gt;crypto remote-vpn-client&lt;BR /&gt;interface radio1&lt;BR /&gt;interface radio2&lt;BR /&gt;interface ge1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address dhcp&lt;BR /&gt;ip address zeroconf secondary&lt;BR /&gt;ip dhcp client request options all&lt;BR /&gt;use firewall-policy default&lt;BR /&gt;use client-identity-group default&lt;BR /&gt;service pm sys-restart&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;rf-domain HH-Madong&lt;BR /&gt;location HH-madong&lt;BR /&gt;timezone Asia/Seoul&lt;BR /&gt;country-code kr&lt;BR /&gt;ad-wips-wireless-mitigation disable&lt;BR /&gt;ad-wips-wired-mitigation disable&lt;BR /&gt;!&lt;BR /&gt;rf-domain HH-Pangyo&lt;BR /&gt;location HH-pangyo&lt;BR /&gt;timezone Asia/Seoul&lt;BR /&gt;country-code kr&lt;BR /&gt;ad-wips-wireless-mitigation disable&lt;BR /&gt;ad-wips-wired-mitigation disable&lt;BR /&gt;!&lt;BR /&gt;rf-domain HH-Sinsa&lt;BR /&gt;location HH-sinsa&lt;BR /&gt;timezone Asia/Seoul&lt;BR /&gt;country-code kr&lt;BR /&gt;ad-wips-wireless-mitigation disable&lt;BR /&gt;ad-wips-wired-mitigation disable&lt;BR /&gt;!&lt;BR /&gt;rf-domain default&lt;BR /&gt;no country-code&lt;BR /&gt;ad-wips-wireless-mitigation disable&lt;BR /&gt;ad-wips-wired-mitigation disable&lt;BR /&gt;!&lt;BR /&gt;nx5500 40-83-DE-86-C4-98&lt;BR /&gt;use profile default-nx5500&lt;BR /&gt;use rf-domain default&lt;BR /&gt;hostname nx5500-86C498&lt;BR /&gt;license AAP e1b0e7a6e59eb47dc42786f441bfe47150fafc9b847a1c19130732ce9c14e1cb21ded0e5d20f77bb&lt;BR /&gt;license ADSEC DEFAULT-ADV-SEC-LICENSE&lt;BR /&gt;ip default-gateway 172.26.13.1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address 172.26.13.10/24&lt;BR /&gt;interface vlan980&lt;BR /&gt;logging on&lt;BR /&gt;logging console warnings&lt;BR /&gt;logging buffered warnings&lt;BR /&gt;adoption-mode controller&lt;BR /&gt;!&lt;BR /&gt;ap410c 18-49-F8-18-51-80&lt;BR /&gt;use profile Harim-Holdings-MD-AP410c&lt;BR /&gt;use rf-domain HH-Madong&lt;BR /&gt;hostname HH-MD-1F-AP-1&lt;BR /&gt;ip default-gateway 172.26.12.1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address 172.26.12.10/24&lt;BR /&gt;&lt;FONT color="#FF0000"&gt;use captive-portal server captiveportal-test&lt;/FONT&gt;&lt;BR /&gt;controller host 172.26.13.10&lt;BR /&gt;!&lt;BR /&gt;ap410 24-1F-BD-DB-53-0C&lt;BR /&gt;use profile Harim-Holdings-SS-AP410i&lt;BR /&gt;use rf-domain HH-Sinsa&lt;BR /&gt;hostname HH-SS-1F-AP-1&lt;BR /&gt;ip default-gateway 172.26.202.1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address 172.26.202.10/24&lt;BR /&gt;controller host 172.26.13.10&lt;BR /&gt;!&lt;BR /&gt;ap410 24-1F-BD-DB-53-8A&lt;BR /&gt;use profile Harim-Holdings-PG-AP410i&lt;BR /&gt;use rf-domain HH-Pangyo&lt;BR /&gt;hostname HH-PG-1F-AP-1&lt;BR /&gt;ip default-gateway 172.26.102.1&lt;BR /&gt;interface vlan1&lt;BR /&gt;ip address 172.26.102.10/24&lt;BR /&gt;controller host 172.26.13.10&lt;BR /&gt;!&lt;BR /&gt;!&lt;BR /&gt;end&lt;/P&gt;&lt;P&gt;&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Wed, 22 Apr 2026 08:43:53 GMT</pubDate>
      <guid>https://community.extremenetworks.com/t5/extremewireless-wing/captive-portal-page-can-not-redirection/m-p/121619#M10010</guid>
      <dc:creator>orcl2020</dc:creator>
      <dc:date>2026-04-22T08:43:53Z</dc:date>
    </item>
    <item>
      <title>Re: Captive Portal page can not redirection</title>
      <link>https://community.extremenetworks.com/t5/extremewireless-wing/captive-portal-page-can-not-redirection/m-p/121624#M10011</link>
      <description>&lt;P&gt;Your captive portal should run in&amp;nbsp;&lt;SPAN&gt;server mode "centralized controller".&lt;BR /&gt;Then&amp;nbsp;&lt;/SPAN&gt;&lt;SPAN&gt;you have to map the captive portal to your controller and not to one specific access point.&lt;BR /&gt;Furhermore your controller needs to have an IP address in the captive portal VLAN (980), because the NX5500 will "play" webserver for the necessary captive portal webpages.&lt;BR /&gt;&lt;BR /&gt;If you like to have each AP running the captive portal, you have to use the captive portal mode "Internal (Self).&lt;BR /&gt;But then each AP needs to have an IP address in VLAN 980.&lt;BR /&gt;Therefore, centralized controller will be the easiest.&lt;BR /&gt;&lt;BR /&gt;Please have a look into the attachement.&lt;BR /&gt;It will explain the captive portal in WiNG in detail.&lt;BR /&gt;&lt;BR /&gt;&lt;BR /&gt;&lt;/SPAN&gt;&lt;/P&gt;</description>
      <pubDate>Wed, 22 Apr 2026 12:42:00 GMT</pubDate>
      <guid>https://community.extremenetworks.com/t5/extremewireless-wing/captive-portal-page-can-not-redirection/m-p/121624#M10011</guid>
      <dc:creator>Angelo_Cargnel</dc:creator>
      <dc:date>2026-04-22T12:42:00Z</dc:date>
    </item>
    <item>
      <title>Re: Captive Portal page can not redirection</title>
      <link>https://community.extremenetworks.com/t5/extremewireless-wing/captive-portal-page-can-not-redirection/m-p/121636#M10012</link>
      <description>&lt;P&gt;I checked the attached PDF, and I saw the section about configuring captive portal in "centralized controller" server mode.&lt;/P&gt;&lt;P&gt;But my current test environment seems to be different from the example in the PDF.&lt;BR /&gt;Right now, I only have a wireless controller, switches, and APs in the lab.&lt;BR /&gt;There is no separate authentication server, DNS server, or web server for the captive portal page.&lt;/P&gt;&lt;P&gt;In this kind of setup, is it still possible to configure captive portal in "centralized controller" server mode?&lt;/P&gt;&lt;P&gt;My goal is that when a user connects to the guest SSID, they should be redirected to the captive portal web page.&lt;/P&gt;</description>
      <pubDate>Thu, 23 Apr 2026 08:26:01 GMT</pubDate>
      <guid>https://community.extremenetworks.com/t5/extremewireless-wing/captive-portal-page-can-not-redirection/m-p/121636#M10012</guid>
      <dc:creator>orcl2020</dc:creator>
      <dc:date>2026-04-23T08:26:01Z</dc:date>
    </item>
    <item>
      <title>Re: Captive Portal page can not redirection</title>
      <link>https://community.extremenetworks.com/t5/extremewireless-wing/captive-portal-page-can-not-redirection/m-p/121639#M10013</link>
      <description>&lt;P&gt;Yes, this is possible.&lt;BR /&gt;1. The webserver for the captive portal webpages is your controller. Therefore, the controller &lt;U&gt;must&lt;/U&gt; have an IP address in VLAN 980.&lt;BR /&gt;2. The authentication server is your controller (again). You have to configure all the radius server details as described in the PDF file.&lt;BR /&gt;3. You must have a DNS server available in your network. The controller will not do so.&lt;BR /&gt;There is no need to add a DNS alias to the DNS server to resolve the captive portal alias.&lt;BR /&gt;The firewall in the controller will "intercept" the DNS request to the captive portal webserver alias and answer on behalf of the DNS server with the IP address of VLAN 980 from the controller. But before your client will send any DNS request, it will send an ARP request to the DNS server IP address. If there is no answer (ARP reply) to the ARP request, the client will never send any DNS request, therefore you must have a DNS server which is reachable...&lt;/P&gt;</description>
      <pubDate>Thu, 23 Apr 2026 12:44:45 GMT</pubDate>
      <guid>https://community.extremenetworks.com/t5/extremewireless-wing/captive-portal-page-can-not-redirection/m-p/121639#M10013</guid>
      <dc:creator>Angelo_Cargnel</dc:creator>
      <dc:date>2026-04-23T12:44:45Z</dc:date>
    </item>
    <item>
      <title>Re: Captive Portal page can not redirection</title>
      <link>https://community.extremenetworks.com/t5/extremewireless-wing/captive-portal-page-can-not-redirection/m-p/121671#M10020</link>
      <description>&lt;P&gt;Hello,&lt;/P&gt;&lt;P&gt;Based on your previous reply, I realized that there was no DNS server in my test environment, so I configured the switch to allow the test WLAN to reach the external Internet.&lt;/P&gt;&lt;P&gt;The switch is acting as the DHCP server, and I configured it to hand out the IP address of a DNS server located on the external network.&lt;/P&gt;&lt;P&gt;You mentioned that the controller firewall intercepts DNS requests for the captive portal webserver alias.&lt;/P&gt;&lt;P&gt;Is this something that needs to be configured under the firewall settings in WiNG Manager?&lt;/P&gt;&lt;P&gt;I checked the guide, but I could not find any firewall-related configuration there.&lt;/P&gt;</description>
      <pubDate>Tue, 28 Apr 2026 07:00:09 GMT</pubDate>
      <guid>https://community.extremenetworks.com/t5/extremewireless-wing/captive-portal-page-can-not-redirection/m-p/121671#M10020</guid>
      <dc:creator>orcl2020</dc:creator>
      <dc:date>2026-04-28T07:00:09Z</dc:date>
    </item>
    <item>
      <title>Re: Captive Portal page can not redirection</title>
      <link>https://community.extremenetworks.com/t5/extremewireless-wing/captive-portal-page-can-not-redirection/m-p/121676#M10021</link>
      <description>&lt;P&gt;Yes, the DNS ALG needs to be active (CLI command "alg dns").&lt;BR /&gt;But this is by default.&lt;BR /&gt;For interception of the DNS request and the proper answer, you need to configure the server mode as centralized-controller and a DNS alias for the server host, e.g. "cp.test.com". Please be aware that an alias with a ".lan" domain might not work properly.&lt;BR /&gt;Futhermore, the controller needs to have an IP address in the hotspot WLAN VLAN (980).&lt;BR /&gt;You should use the command "redirection ports" with the value 80, as port 80 is reserved for the controller internal webserver for the GUI (WEB configuration).&lt;BR /&gt;As far as I remember the default port for a http connection is 8080 and for https 444.&lt;/P&gt;</description>
      <pubDate>Tue, 28 Apr 2026 14:26:31 GMT</pubDate>
      <guid>https://community.extremenetworks.com/t5/extremewireless-wing/captive-portal-page-can-not-redirection/m-p/121676#M10021</guid>
      <dc:creator>Angelo_Cargnel</dc:creator>
      <dc:date>2026-04-28T14:26:31Z</dc:date>
    </item>
  </channel>
</rss>

