topic RE: AP7532 configuration issue in ExtremeWireless (WiNG)

AP7532 configuration issue

Di_Wu — Sat, 05 Aug 2017 22:06:00 GMT

When I finished the setup of my AP7532, it seems didn't running the right confirguation.

Below is my radio settings:

And finally please see the below status：

It's really confused me. Could someone tell me why?
Thank you very much.

RE: AP7532 configuration issue

RobertZ — Sun, 06 Aug 2017 01:26:00 GMT

What seems to be the issue? Please provide the firmware version your running also.

RE: AP7532 configuration issue

Di_Wu — Sun, 06 Aug 2017 01:26:00 GMT

Sorry I didn't explain very clear. AP7532i, firmware version is 5.9.0-033R.
From the radio setting you can see for 5G I set data rate 11AC, but actually AP is running 11A.

RE: AP7532 configuration issue

Edmundo — Sun, 06 Aug 2017 05:56:00 GMT

Hi
Your question is because they are connecting to the Raadio5 Ghz?

RE: AP7532 configuration issue

Di_Wu — Sun, 06 Aug 2017 05:56:00 GMT

My setting is 11AC but AP always running 11A at 54M data rate.
How can I make the AP running at 11AC band.

RE: AP7532 configuration issue

Edmundo — Sun, 06 Aug 2017 05:56:00 GMT

Hi

You need to change the data rate settings.
CLI tries the following:

AP7532#configure
Enter configuration commands, one per line. End with CNTL/Z.
AP7532(config)#self
AP7532(config-device-84-24-8D-1B-71-C8)#interface radio 2
AP7532(config-device-84-24-8D-1B-71-C8-if-radio2)#data-rates an
AP7532(config-device-84-24-8D-1B-71-C8-if-radio2)#commit write

RE: AP7532 configuration issue

Di_Wu — Sun, 06 Aug 2017 05:56:00 GMT

Actually I am not familiar with the CLI configuration.
Below is my setting. How can I change?

!! Configuration of AP7532 version 5.9.0.0-033R
!
!
version 2.5
!
!
client-identity-group default
load default-fingerprints
!
ip access-list BROADCAST-MULTICAST-CONTROL
permit tcp any any rule-precedence 10 rule-description "permit all TCP traffic"
permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit DHCP replies"
deny udp any range 137 138 any range 137 138 rule-precedence 20 rule-description "deny windows netbios"
deny ip any 224.0.0.0/4 rule-precedence 21 rule-description "deny IP multicast"
deny ip any host 255.255.255.255 rule-precedence 22 rule-description "deny IP local broadcast"
permit ip any any rule-precedence 100 rule-description "permit all IP traffic"
!
mac access-list PERMIT-ARP-AND-IPv4
permit any any type ip rule-precedence 10 rule-description "permit all IPv4 traffic"
permit any any type arp rule-precedence 20 rule-description "permit all ARP traffic"
!
ip snmp-access-list default
permit any
!
firewall-policy default
no ip dos tcp-sequence-past-window
no stateful-packet-inspection-l2
ip tcp adjust-mss 1400
!
!
mint-policy global-default
!
meshpoint-qos-policy default
!
wlan-qos-policy "Guest WiFi"
classification voice
classification non-wmm voice
voice-prioritization
svp-prioritization
rate-limit client to-air
rate-limit client to-air rate 3600
rate-limit client from-air
rate-limit client from-air rate 3600
qos trust dscp
qos trust wmm
!
wlan-qos-policy "Home WiFi"
classification voice
classification non-wmm voice
voice-prioritization
svp-prioritization
rate-limit client to-air rate 5000
rate-limit client from-air rate 5000
qos trust dscp
qos trust wmm
!
wlan-qos-policy default
qos trust dscp
qos trust wmm
!
radio-qos-policy default
!
roaming-assist-policy "Guest WiFi"
!
roaming-assist-policy "Home WiFi"
!
wlan "Guest WiFi"
ssid Guest
vlan 1
bridging-mode local
encryption-type ccmp
authentication-type none
no client-client-communication
fast-bss-transition
wpa-wpa2 psk 0 1234567890
use wlan-qos-policy "Guest WiFi"
use roaming-assist-policy "Guest WiFi"
!
wlan "Home WiFi"
ssid WiFi
vlan 1
bridging-mode local
encryption-type ccmp
authentication-type none
no client-client-communication
fast-bss-transition
wpa-wpa2 psk 0 wudi228920
use wlan-qos-policy "Home WiFi"
use roaming-assist-policy "Home WiFi"
!
smart-rf-policy default
assignable-power 5GHz max 20
assignable-power 5GHz min 20
assignable-power 2.4GHz max 20
assignable-power 2.4GHz min 20
channel-list 5GHz 21,25,36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,165,184,188,192,196,208,212,216
channel-list 2.4GHz 1,2,3,4,5,6,7,8,9,10,11,12,13
channel-width 5GHz 80MHz
channel-width 2.4GHz auto
no smart-ocs-monitoring voice-aware 5GHz
no smart-ocs-monitoring voice-aware 2.4GHz
!
radius-group Guest
guest
policy vlan 1
policy ssid Guest
!
radius-group Home
policy vlan 1
policy ssid WiFi
!
radius-server-policy WERSP
use radius-group Home
use radius-group Guest
!
!
management-policy default
telnet
no http server
https server
ssh
user admin password 1 f9f3daa83b041b6be29a0e4b7b4a9836e7569af3cb2eaa8ea91a80f6813f9427 role superuser access all
snmp-server community 0 private rw
snmp-server community 0 public ro
snmp-server user snmptrap v3 encrypted des auth md5 0 admin123
snmp-server user snmpmanager v3 encrypted des auth md5 0 admin123
!
nsight-policy default
!
profile ap7532 default-ap7532
autoinstall configuration
autoinstall firmware
use radius-server-policy WERSP
crypto ikev1 policy ikev1-default
isakmp-proposal default encryption aes-256 group 2 hash sha
crypto ikev2 policy ikev2-default
isakmp-proposal default encryption aes-256 group 2 hash sha
crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
crypto ikev1 remote-vpn
crypto ikev2 remote-vpn
crypto auto-ipsec-secure
crypto load-management
crypto remote-vpn-client
interface radio1
power 23
wlan "Home WiFi" bss 1 primary
wlan "Guest WiFi" bss 2 primary
interface radio2
power 23
wlan "Home WiFi" bss 1 primary
wlan "Guest WiFi" bss 2 primary
interface ge1
interface vlan1
ip address dhcp
ip address zeroconf secondary
ip dhcp client request options all
interface pppoe1
use firewall-policy default
use client-identity-group default
logging on
service pm sys-restart
router ospf
dpi
adoption-mode controller
!
rf-domain default
timezone Asia/Shanghai
country-code us
use smart-rf-policy default
use nsight-policy default
!
self
! ap7532 74-67-F7-01-24-FC
radio-count 2
use profile default-ap7532
use rf-domain default
hostname ap7532-0124FC
license AP VIRTUAL_CONTROLLER_DEFAULT_AP_LICENSE
no adoption-site
location default
interface radio1
data-rates default
ntp server 202.120.2.101
no virtual-controller
rf-domain-manager capable
no adoption-mode
!
!
end

RE: AP7532 configuration issue

Edmundo — Sun, 06 Aug 2017 05:56:00 GMT

First you have to access via SSH to the AP7532.
You can download Putty.exe to establish the connection

Once you enter the IP of the AP7532 and enter, execute these commands

AP7532#configure
Enter configuration commands, one per line. End with CNTL/Z.
AP7532(config)#self
AP7532(config-device-84-24-8D-1B-71-C8)#interface radio 2
AP7532(config-device-84-24-8D-1B-71-C8-if-radio2)#data-rates an
AP7532(config-device-84-24-8D-1B-71-C8-if-radio2)#commit write

RE: AP7532 configuration issue

Di_Wu — Sun, 06 Aug 2017 05:56:00 GMT

I think it's difficult for me. How can I config this via Web UI.
My AP runnings the WiNG OS 5.9.0.

RE: AP7532 configuration issue

Edmundo — Sun, 06 Aug 2017 05:56:00 GMT

Which of Part has the AP7532. This is on the back label of the computer.
P/N:

RE: AP7532 configuration issue

Di_Wu — Sun, 06 Aug 2017 05:56:00 GMT

AP-7532-67030-US

RE: AP7532 configuration issue

Edmundo — Sun, 06 Aug 2017 05:56:00 GMT

Configuration/Wireless/Home WiFi"

Enable Per-Client and Aggregate (WLAN) Select 1,000,000 kps

RE: AP7532 configuration issue

Di_Wu — Sun, 06 Aug 2017 05:56:00 GMT

Still 11A, not 11AC

RE: AP7532 configuration issue

RobertZ — Sun, 06 Aug 2017 05:56:00 GMT

Are you sure that the supplicant ( mobile device ) supports 802.11ac?

RE: AP7532 configuration issue

RobertZ — Sun, 06 Aug 2017 05:56:00 GMT

Can you provide CLI command output :

show wireless client detail

RE: AP7532 configuration issue

Edmundo — Sun, 06 Aug 2017 05:56:00 GMT

In addition to what Robert comments

On customers how does the status appear?

RE: AP7532 configuration issue

Di_Wu — Sun, 06 Aug 2017 05:56:00 GMT

Of course my device (MacBook Pro) support 11AC

RE: AP7532 configuration issue

Edmundo — Sun, 06 Aug 2017 05:56:00 GMT

Your computer is only connecting to the 802.11 a standard so you can only have 54 Mbs

Try the following

Disables Client Roam Assit and Voice Vlan

- Turn off the radio on your laptop then turn it on

- Check that you are already associated as AC

RE: AP7532 configuration issue

Di_Wu — Sun, 06 Aug 2017 05:56:00 GMT

Thank you very much. I will try tonight. By the way, is WiNG Azara Cloud available for trial?

RE: AP7532 configuration issue

Di_Wu — Sun, 06 Aug 2017 05:56:00 GMT

Thank you very much.
Finally it works!!!