topic RE: Where is "RSS Threshold" or similar on the 7532 ap in ExtremeWireless (WiNG)

Where is "RSS Threshold" or similar on the 7532 ap

Elias_Morais_Pe — Fri, 23 Feb 2018 21:04:00 GMT

Hello guys,

I would like to know where I find the "RSS Threshold" or similar on the RF domain profile of 7532 ap?

It has some document of better configurations for an environment with more than 50 7532 ap with rfs 6000 controller.

RE: Where is "RSS Threshold" or similar on the 7532 ap

Ondrej_Lepa — Fri, 23 Feb 2018 21:13:00 GMT

Hello Elias,

do you mean something like this?
VX# show wireless radio statistics rf on

Regards,
Ondrej

RE: Where is "RSS Threshold" or similar on the 7532 ap

Elias_Morais_Pe — Fri, 23 Feb 2018 21:42:00 GMT

Hello Ondrej,

Thanks for the answer!!!

Now I would like to know how to configure so that when a client is on an AP with the signal smaller than -70 it is disconnected or pass to another AP with a better signal?

RE: Where is "RSS Threshold" or similar on the 7532 ap

Ondrej_Lepa — Fri, 23 Feb 2018 21:42:00 GMT

RE: Where is "RSS Threshold" or similar on the 7532 ap

Elias_Morais_Pe — Fri, 23 Feb 2018 21:42:00 GMT

Hi Ondrej,

I searched the options via wegui but did not find it. Can I make these settings via wegui, or only via terminal?

RE: Where is "RSS Threshold" or similar on the 7532 ap

Ondrej_Lepa — Fri, 23 Feb 2018 21:42:00 GMT

Hi Elias,

I bet this is something you can configure only using CLI.

Regards,
Ondrej

RE: Where is "RSS Threshold" or similar on the 7532 ap

Elias_Morais_Pe — Fri, 23 Feb 2018 21:42:00 GMT

Ok Ondrej,

Thanks for your help!!! 

RE: Where is "RSS Threshold" or similar on the 7532 ap

Tuan_Nguyen1 — Mon, 03 Jun 2019 15:20:00 GMT

Hi @Ondrej Lepa

Can you direct me to configure roaming-assist-policy RSSI the GUI interface?

RE: Where is "RSS Threshold" or similar on the 7532 ap

Elias_Morais_Pe — Mon, 03 Jun 2019 18:30:00 GMT

Hello @Tuan Nguyen,

The @Ondrej Lepa in some posts above, informs that only via CLI configuration is possible.

RE: Where is "RSS Threshold" or similar on the 7532 ap

Tuan_Nguyen1 — Tue, 10 Sep 2019 11:26:00 GMT

Hi Elias,

use roaming assistance policy then

VX(config)# roaming-assist-policy RSSIVX(config-roaming-assist-policy-RSSI)# handoff-threshold <-100--40> RSSI
VX(config)# wlan RSSIVX(config-wlan-RSSI)# use roaming-assist-policy RSSI Make sure though, you have some "room" for roaming overlap.
Confirm with client RF statistics

VX# show wireless client statistics rf on
Regards,
Ondrej

Hi @Ondrej Lepa

CLI: handoff-threshold <-100--40

Means the threshold of RSSI -40 to -100dbm right?. If i need signal smaller than -75dbm it is disconnected or pass to another AP with a better signal i set CLI to
VX(config-roaming-assist-policy-RSSI)# handoff-threshold <-75--40> RSSI

I'm doing right?