topic RE: 404 - Not Found in ExtremeWireless (WiNG)

404 - Not Found

Vimalraj_Veerab — Fri, 16 Mar 2018 17:52:00 GMT

Hi there,

I'm using VX9000(5.9.1.2-006R) with 54 AP7532 adopted with it.

While checking from AP configuration on management-policy default http and https server both are enabled.

But while trying to connect from web UI I'm getting error of 404- Not Found on both https and http.

RE: 404 - Not Found

RobertZ — Fri, 16 Mar 2018 17:53:00 GMT

Q & A: Why AP responds with 404 server error when accessing

RE: 404 - Not Found

Vimalraj_Veerab — Fri, 16 Mar 2018 17:53:00 GMT

Thanks for the update.

RE: 404 - Not Found

Vimalraj_Veerab — Fri, 16 Mar 2018 17:53:00 GMT

How to check from AP side it is loaded with LEAN image or full image .?

RE: 404 - Not Found

RobertZ — Fri, 16 Mar 2018 17:53:00 GMT

The controller by default uses the lean image to upgrade the APs during adoption.

RE: 404 - Not Found

Daniel_Mejia — Fri, 16 Mar 2018 17:53:00 GMT

Hi Vimalraj,

As Rob stated, Adopted APs are provisioned with a lean image upgrade when adopted and managed by a controller. Lean images do not provide GUI access since controller management is assumed.

RE: 404 - Not Found

Christopher_Fra — Fri, 16 Mar 2018 17:53:00 GMT

There is no method on the controller to determine if the AP images are LEAN or not. WiNG 5 wireless controller starting using LEAN images for APs starting v5.8.

RE: 404 - Not Found

Bin — Mon, 19 Mar 2018 03:46:00 GMT

Kindly add another similar discussion from the Hub.

https://community.extremenetworks.com/extreme/topics/ap7522-cant-open-gui?topic-reply-list%5Bsetting...

Best regards,

RE: 404 - Not Found

Vimalraj_Veerab — Mon, 19 Mar 2018 03:46:00 GMT

Thanks Bin.